Gent S3-S-R S3 Sounder with Red Body
* S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation.

The Gent S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and visual alarms. The sounders shall be capable of providing 3 different sound signals, which are selected/configured via the main control panel. Configuration of sounder patterns will not be carried out locally at individual sounders. In order to meet with the requirements of BS5839 Part 1, the frequency of sound signals emitted will be as follows:
Features & Benefits:
* 200 per loop
* Red & White options
* 103dbA at 1 metre
* 3 Sound signals
* 2 integral Line Isolators

The S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.
The S4-710 is a truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.

S4-34845 Manual Call Point with Protective Cover & Resettable Element
The S4-34845 is a Addressable Manual Call Point (MCP) from the Gent range. The S4-34845 has an response time of less than 1 second. The S4-34845 Manual Call Point comes with a protective cover and also comes with the resettable element, which can be done at any given time using a Call Point Test Key seen in the related products.
The Addressable Range of Gent Manual Call Points (MCP) are for the Vigilon and Nano System, which are easy to install and have the ability to be mounted on standard installation back boxes or they can be mounted on bespoke red back boxes for surface mounting.

• Flexible solution for adding notification circuits where needed
• Support for Class B (style Y) or Class A (style Z) wiring
• Panel controlled status LED that flashes green in normal state and is solid red in alarm
• Polling LED visible through the cover plate
• Rotary address switches for fast installation
• SEMS screws for easy wiring
• UL Listed
• CSFM Listed
• MEA Listed 386-02-E
Vol. II

• Single contact monitor
• Small and lightweight size allows for flexible mounting options
• Support for Class B wiring
• Fully supervised
• Rotary address switches for fast installation
• Analog communications
• UL Approved
• CSFM Listed
• MEA Listed 457-99-E Vol. V

• Installer can open station without causing an alarm condition
• Dual-color LED is visible through handle of station blinks green to indicate normal operation and remains steady red in an alarm condition
• Key operated test and reset lock using lock plate actuator
• Key matches compatible FACP locks
• Meets ADA requirement for 5 lbs maximum pull force to active
• Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13])
• Shell, door, and handle molded from durable LEXAN®
• Reliable analog communications for trouble-free operation
• Braille text on station handle
• Rotary address switches for fast installation
• Handle latches in down position and the word Activated appears, clearly indicating the station has been pulled
• UL Listed, including UL 38, Standard of Manually Actuated Signaling System
• CSFM Listed
• MEA Listed

• RFP-2100 or RFP-2100B can be used in a networked system where at lease one IFP-2100 is in the system
• Network support for up to 32 Sites
• Built-in support for up to 159 IDP/SK detectors and 159 IDP/SK modules or 127 SD SLC devices
• Four line LCD display with 40 characters per line
• Available in a red or black cabinet
• IFP-2100 or RFP-2100 can be surface or flush mounted
• Four programmable function keys
• Network card allows copper network connection with a multi-mode or single-mode fiber connection option
• Built-in dual phone line, digital alarm communicator/
transmitter (DACT), IP or optional cellular technologies
• JumpStart AutoProgramming® feature for easy programming
• Renewable license on downloading software helps inhibit unauthorized programming
• Built in USB interface for programming
• Supports up to four SWIFT wireless gateways. Each gateway can have up to 49 wireless devices
• Supports Class B (Style 4) and Class A (Style 6 or Style 7 configuration for SLC, and SBUS.

 Network support for up to 32 Sites
• Built-in support for up to 75 IDP/SK detectors and 75 IDP/SK modules or 75 SD SLC devices
• Four line LCD display with 40 characters per line
• Available in a red or black cabinet
• $an be surface or flush mounted
• Built-in USB interface for convenient and quick programming
• Programmable date setting for Daylight Saving Time
• JumpStartk Buto Qrogramming feature for easy programming
• Built-in dual phone line, digital alarm
communicator/ transmitter (DACT) XJUI-IP BOE-optional cellular technologies
• Network card allows copper network connection with a multi-mode or single-mode fiber connection option
• Convenient field-upgradeable firmware
• Supports up to four SWIFTk wireless gateways. Each gateway can have up to 49 wireless devices
• Supports Class B (Style 4) and Class A (Style 6 or Style 7 configuration for SLC, and SBUS
• Built-in-/”$ synchronization for EFJWDFT from AMSECOk, Gentexk, System Sensork, and Wheelockk
• Reports events to central station by point or by zone

silent knight 6815 alarm:

The 6815 is a signaling line circuit (SLC) expander for use with Honeywell
Silent Knight 6820 or 6820EVS fire alarm control panels (FACPs)using
System Sensor® (SK) protocol. The 6815 signaling circuit has the same
functionality as the SLC that is built into the 6820 and 6820EVS panels
and support the same addressable devices as the one in each panel. The
number of 6815 SLCs that can be used within one system is largely
dependent on maximum available points. They provide a powerful way to
customize configurations in large or complex installs.

FEATURES

• The number of 6815 SLCs that can be used in one system is
largely determined by maximum point counts. With 1,110
available points on the 6820 and 6820EVS and 6815 SLC
flexibility, new design and installation opportunities are now possible.
• Use the 5815RMK mounting kit to securely house more SLCs within one system.
• Pair with the separate 6860 remote annunciator for additional installation
and operating options. The 6860 has four programmable
buttons that are useful for executing routine or complex tasks.
• Up to two additional 6815 SLCs can be
securely housed in one FACP, thus limiting the need for separate housing
• Useful for installations where buildings are connected for
multi-site benefits using fiber optic or copper wiring. The ability to use multiple
6815 SLCs in these situations provides additional fire system design options.

• Complete range of sensors with
combinations of advanced sensing
technologies including heat, dual angle
optical scatter and carbon monoxide (CO)
• Combined sensing of carbon monoxide with dual angle optical scatter and heat
allows a higher level of false alarm immunity in presence of steam
and while still maintaining the integrity of detecting fi res
• Each sensor has certifi ed sensitivity settings that suit
certain environments/ applications and may
be programmed for different times of the day if required
• Short circuit Isolator in each device
• Confi gurable input/ output connection for remote indicator or
supervisory input fully synchronised sound
patterns via the control panel
• Sensor sounders have adjustable sound level
and tones to match system sounders
• Sounder element monitoring and over-load protection
to ensure operation even in event of cable fault
• Sound output synchronised and compatible with
S-Quad range of EN54-23 VADs.

  Related Products:

• S-Quad Multi-Sensor with                       Integrated Sounder and Visual
• Alarms Device (VAD)                               S-Cubed
• Analogue Addressable Manual               Call Points
• Beam Sensors                                             SAFE Solution
• Loop Powered Interfaces                         Mains Switching Interface
• Mains Powered Interface                         34000 S-Quad Adapter Base.
• S-Quad Anti-Ligature Base                      EN54-4 Approved Power Supply Units
• Electromagnetic Door Holders               Transformer Rectifier 24v Door Retainer
• Fire System Document Box                     PAGING
• RESPONSE AID                                        PAGING
• RESPONSE PLUS                                     Response Plus
• RECHARGEABLE TFT                            DISPLAY PAGER
• PAGING

Gent S4-34420 Interface Single Channel Low Voltage Output (PCB and Enclosure Seperate, Housing Required)
Vigilon can accommodate a high quantity of loop powered interface units offering flexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost-effective solution with each device individually addressed increasing the overall management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup.

• Integral EN54-4 PSUand battery standby for 24 hours (4 loop)
• Integral EN54-4 PSU for 72 hours with external batteries (6 loop)
• Vigilon’s advanced sensing technology and powerful software
processing in the panel quickly identifies real fires
• PC based commissioning tools
allow complex fire plans to be configured
• Advanced loop card technology allows for
system status monitoring and diagnostics
• Extended event log using flash memory card
• The control panel has a simple user interface
with LCD screen providing accurate information in an emergency
• Multiple panel networks can be programmed
seamlessly as one system, allowing for
flexible design and system management
• Flexible programming options are available at the panel
• All Vigilon devices connect onto the same
two core loop, separate sounder or
repeater panel wiring circuits are not required
• In the event of a fire or fault, Vigilon’s analogue addressable
technology will provide a detailed log of events
• PC based Graphics user interface (GUI) available

  Related Products:

• BACnet Gateway                                Single Mode FibreVisual Alarm Devices
• Advanced Vigilon Loop Card          Nano Control Panel
• Vigilon Plus Control Panels            Non-Addressable Audible
• Visual Devices                                    Electronic Bells
• Xenex Control Panel                        Conventional Manual Call Points
• ES Detect                                            Non-Addressable Audible
• Visual Alarm Devices                       Non-Addressable Audible
• Visual Alarm Devices                       FAAST
• AUTOMATIC                                     PURGING UNIT
• SAMPLING HOLE                            IDENTIFICATION
• VESDA

• Sleek, low-profi le design
• Reliable analog communications for trouble-free operation
• Age resistant polymer housing
• Innovative thermistor sensing circuit
• Superior EMI resistance for reliability
• Variety of mounting options to meet any application
• Dual LED indicators for 360º visibility
• Detector transmits signal to indicate maintenance is required
• Plug-in mounting provides ease of installation
• Optional remote LED annunciator (System Sensor® PN RA100Z)
• Tamper-proof feature available on mounting bases
• Rotary address switches for fast installation
• UL Listed
• CSFM Listed
• MEA Listed 383-02-E
Vol. VI