P2rk sounder The SpectrAlert Advance series offers the broadest line of outdoor horns, strobes, and horn strobes in the industry. With white and red plastic housings, wall and ceiling mounting options, and plain and FIRE-printed devices, SpectrAlert Advance can meet virtually any application requirement

• Updated Modern Aesthetics
• Small profile devices for Horns and Horn Strobes
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 30
candela
• Field-selectable candela settings on wall units:
15, 30, 75, 95, 110, 135, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Mounting plate for all standard and all compact wall units
• Mounting plate shorting spring checks wiring continuity before
device installation
• Electrically Compatible with legacy SpectrAlert and SpectAlert
Advance devices
• Compatible with MDL3 sync module
• Listed for wall mounting only

   Related Products:

• InnovairFlex Intelligent Duct Smoke Detector
• InnovairFlex® D355PL Photoelectric Duct Smoke Detector3
• Analog Input Device Control Card
• Eight balanced input module
• Loop Control Module
• Time Control Module
• Remote module

• Enclosure available in red or light gray
• Produces audio feedback
• Accepts the user codes or the fire fighter’s key
• Offers an RS-485 interface to the panel
• Displays large keypad buttons for system reset and silence
• Includes the following five status LEDs:
– alarm
– supervisory
– trouble
– silence
– AC power conditions
• Has an 80-character backlit LCD display that shows 4 lines with 20 characters on each line
• The remote annunciator operation and appearance is
identical to the GWF-7075 built-in annunciator
• Installs up to eight RA-1000s per GWF-7075
• Supports a simultaneous use of multiple RA-1000s
• Provides an on-board piezo sounder with
audio that broadcasts alarms, troubles, and supervisories
• Use wiring lengths up to 6,000 ft. from the
FACP (depending on the wire gauge and the number of devices on the SBUS)

   Related Products:

• Digital Key Module DKM18 for redundant call stations
• DCS15 Control Panel
• MS-5024 and MS-5024UD Replacement Motherboard
• APA151 Piezo Annunciator
• InnovairFlex™ D4P120 Power Board Component
• InnovairFlex™ D2 2-Wire Photoelectric Duct Smoke Detector
• InnovairFlex™ D4S 4-Wire Photoelectric Sensor
• Carbon Monoxide Detector
• i4 Series CO/Smoke Detector Replacement CO Sensor
• i4 Series Combination CO/Photoelectric Smoke Detector

Horing iR flame detector
LPCB approved
Characteristics
• Built-in high performance Microprocessor
that able to analysis flame signal more
accuracy.
• IR sensor has better detection range than
UV sensor.
• High immunity to sunlight or other noisy
source.
Applications
• Premises with higher ceilings: theater, gym, storage, gallery or
warehouse, etc.
• Places where fires happen easily: places storing with combustible
goods, gas stations, factory working places, machine rooms, etc.
• Ventilate places: open markets, station platforms, hotel lobbies,
department stores, etc. (places that smoke and heat can not gather
during early period of fire)
• Others: tunnels, computer rooms, etc.

• UL521 and CE approval
• Up to 500m of sensor cable per zone
• Separate pre-alarm and alarm signals
• Easy programmable interface
• Enclosure temperature alarm
• IP65 rated enclosure
• No nomograms or charts required

• UL and C-UL listed
• 33 sound output settings
• Horn or chime sound output
• Wall or Ceiling mount
• Indoor/outdoor listed. Outdoor installation
requires a weatherproof backbox (ordered
separately)
• Pre-wire back plate
• Universal back plate mounting (single gang,
double gang, octagon,    or 4” square)
• Single screw mounting

Related Products:

• BEAM1224                                 CR/CF-MP SERIES
• D2                                                 D4120
• SD-2 / SD-4 SERIES                 SD-100 SERIES
• MIR-65                                         I3 SERIES
• TD SERIES                                  MS-400(U)
• MS-403/404 SERIES                MS-700 SERIES
• MS-700U SERIES                      XAL-53
• FR-320                                         FX-3500 RCU

• Heavy-duty construction
• Red fi nish
• Flush or surface mount
• Key-locked door
• Break glass insert
• Rugged ABS plastic handset with coiled cord
• Portable handsets and telephone jacks (optional)
• Optional storage cabinet for portable handsets
• Bilingual French/English Markings on Canadian
models
• Supervised wiring

Fire Alarm Control
• 1 SLC loop expandable up to 28
• Each SLC is capable of supporting 159 Analog Sensors and 159
Addressable Modules which can be wired in Style 6 or 7 (Class A) or
Style 4 (Class B)
• Four Style Z/Y (Class A/B) Notification Appliance Circuits rated at
1.7 Amps each
• Supports both 80 character and 960 character back-lit LCD displays
with user friendly menu
• English, French, Arabic, Hebrew, Chinese, Hindi, Japanese, Italian,
Spanish and Portuguese. (*supported by RAXN-LCDG Annunciator
in place of main display)
• Correlatable Switch Inputs which allows for multi-functional outputs
• Four Alarm Queues with selector switches and LEDs for Alarm,
Supervisory, Monitor and Trouble
• RS-232 output for remote system printer or CRT
• Two Event History Logs comprised of a 6000 Alarm History Log and
a 6000 Event Log for all events
• Built-in BACnet support
• System can be configured without taking the panel offline
• Supports three configuration files (current, previous and next
configuration) with “hot swap” support
• Supports Boolean logic functions
• Built-in Ethernet port
• Remote diagnostics via a built-in web server
• UL listed for Smoke Control (UUKL)
Audio Control
• Multi-channel operation
• Distributed audio
• Compatible with 520Hz low frequency signal by Mircom
• 5 hard wire fire fighter telephone channels that can be
expanded with intelligent fire phone modules
• 25 or 70 volt system
• Multiple amplifier sizes
• Max. of 180 watts per Integrated Fire & Audio panel
• Expansion to three 360 watts expansion cabinets for a total of
1260 watts of audio power per node
Network Features
• Up to 63 nodes
• Peer-to-peer network communications
• Fully integrated digital network audio and control over a single
pair of copper wire or fiber optic cable
• Supports over 8,000 points per node
• Supports over 560,000 points on a single network
• Remote diagnostics via built in web server and standard
Ethernet port in every node
• Style 4 (Class B) or Style 6 or 7 (Class A) wiring configuration
• Proprietary Arcnet Network Communications protocol

• Sleek, low profile design
• Detectors are equipped with a built-in analog
communications module
• Smoke detectors are available with photoelectric
or ionization technology
• Photoelectric detectors are available with additional
fixed temperature detection
• Heat detectors are available as fixed temperature
or fixed temperature with rate-of-rise detection
• Dual LEDs indicate communications and activate
steady when in alarm
• Low profile base provides easy interchangeability
• Low standby current
• Rotary address switches
• Magnetic test feature
• Superior EMI protection
• Sealed against dirt, insects, and back pressure

• Rotary address switches for fast installations
• Reliable analog communications for trouble free
operation
• Configured by the compatible Fire Alarm Control
Panels for distinct methods of operation
• Age resistant polymer housing
• Dual electronic thermistor design eliminates
directionality
• Superior EMI resistance for reliability
• Microprocessor based design to provide maximum
features
• Simple field cleaning for code compliance
• Dual LED indicators for 360° visibility
• On board drift compensation reduces maintenance
• Transmits signal to indicate maintenance required
• Detector sensitivity increases in hot fires
• Transient smoke conditions are ignored

  Related Products:

• TX3-TOUCH-S15B-WR               TX3-TOUCH-S15S-WR
• TX3-TOUCH-F22-E                     TX3-TOUCH-S22-E
• TX3-T-KIOSK2                             TX3-TOUCH-ADV
• TX3-TOUCH-S15-D                     TX3-TOUCH-F15-D
• MiENTRY APP                              TX3-NANO-S4
• TX3-120C-C                                   TX3-120U-C
• TX3-200-8C-C                              TX3-200-8U-C
• TX3-2000-8C-C                            TX3-2000-8U-C
• TX3-200-4U-C                              TX3-2000-4U-C
• TX3-NSL-12K-C

• Sleek low profile design
• Remote output can be conMiSIP4MiENTRYtrolled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion
sources
• Heat (135F) and heat rate of rise detection
• MODEL OPTION – Short-circuit isolator (MIX-4020-ISO)

• MiENTRY APP
• MiSIP4MiENTRY
• MICONNECT
• MiSIP4PSTN
• 1150 INTERCOM HANDSET
• DO-CR3
• IS SERIES
• KV SERIES
• MA-485 INTERCOM AMPLIFIER

• Sleek low profile design
• Remote output can be controlled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion sources
• MODEL OPTION – Short-circuit isolator (MIX-4030-ISO)
• Heat and heat rate of rise detection
• Selectable high (175F) and low (135F) heat
detection alarm thresholds

Related Products:

• TX3-EMER-1S
• DOOR ALARM STATION
• EMERGENCY CALLING COMPONENTS
• EMERGENCY NURSE CALL SYSTEM
• TX3-ER-8-B

• Flexible application
• Up to 240 units per loop
• Indicating LED provides module status
• Mounts in a standard 4” square backbox
• Can handle Class A or Class B device wiring.
No external components required for class A
operation

Related Products:

• Designed to meet a wide range of applications
• SEMS screws for easy wiring
• Panel controlled status LED (except MIX-M501M)
• Analog communications
• Rotary address switches (except MIX-M500X)
• Low standby current
• Mounts in 4” square junction box

  Related Products:

• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• MR-100/MR-200 SERIES
• UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
• DH SERIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• BC-160
• BPS POWER SUPPLIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE