The touch conrtoller is the heart of the system, providing the power for the touch bus devices, Together with the link to the
local area network. the unit features LCD with menu control touch bus output terminals, auxillary terminals, Battery float charger,.
relay output, RS232 Output, Battery Float Charger, Status LEDs

  Related Products:

• L634
• L672
• L722
• L733
• L744
• L746

the touch lsolator is used to protect the output from the touch controller and limiting the current available to the radials and touch
Devices.

the bus cable connects to the input and provides four current limited outputs for connection the Radial cables with Touch
Devices.

  Related Products:

• IP147C
• L762
• L758
• L753
• L752
• L746S

The Call point Basic is designed to provide a patient calling point with staff
reset button. The unit features Red call button, green Staff button, re-assurance LED
and terminals for connection to bathroom pull cords and a single
input for door contacts.

The unit connects to the radial cabling from the
isolator, and may also connect to three external inputs for bathroom pull
cords .

  Related Products:

• IP250
• IP470
• IP480
• IP590
• L748
• L7700-55

• Two sets of parallel terminals for the Touch Bus
• Three combined closing contact inputs and LED outputs
• Code Blue and Reset Button
• Full colour re-assurance LED
• Re-assurance LED
• Fully programmable
• DIP Switch / Address unique Device Address.
• Supplied in surface mounted enclosure W95xH115xD30mm, 130g

 Related Products:

• L7744
• POEI
• AD1
• BB1
• CMS-IP
• CS1

The Overdoor Light is designed to indicate the status of one or more call points and the unit connects to the a radial from the isolator

  Related Products:

• SSD-PC
• FJB2
• HD2
• KS1
• L714
• L730

The Touch Display is a PoE(power-over-ethernet)device and simply connects
to the Local Area Network via a copper Ethernet RJ45 socket and features an
embedded website for configuration.

  Related Products:

• LCU
• LIMK
• M1
• MR1
• NP2
• NP4

The Bathroom Pull Card is supplied in a self contained enclosure which is tixed
to the ceiling or suitable surface.
The unit features antibacterial pull with cord, together with integral Re-assurance LED.
The maximum length of the cord and pull is 3000mm

 Related Products:

• SSD-P2
• SSD-P4
• PIR1
• SSD-PM2
• RB1
• SCP

All INTERCALL systems can be enhanced with the use of accessories which allows the system to be used by patients with virtually any level of disability . The following list details a few of the most popular accessories with their application and part numbers . In addition to the standard range of accessories , we also manufacture bespoke accessories to suit a particular requirement , please contact your supplier for more information .

 Related Products:

• CMS-IP
• L714
• IP480
• L752
• SSD-CHAIRKIT

Ceiling Pull Switches are used in bathrooms, fitted to the ceiling over the toilet and bath to allow a call to be generated
from these areas. They are fitted with 3 metre length of cord terminated with an easy to operate ‘G’ style pull and
twin re-assurance indicators. 

Related Products:

• SRP
• TIR4
• SSD-BEDKIT
• SSD-CHAIRKIT

The FJB2 replaces the earlier FJB1 and provides four ‘spur’ outputs from the network spine with each output
incorporating a over current/voltage and reverse polarity protection device.

A front panel mounted red/green LED
indicates the condition of the internal fuses and continuously monitors the network data signals.

Individual fuse failure
LED’s are mounted on the reverse of the unit and in the event of a cable fault, on one of the outputs, the ‘spur’ will be
isolated without disabling the entire cable network.

 Related Products:

• COM7950
• ASTRA
• NP2DUAL
• PALPAD

A display unit is required in every location where calls are to be shown and the alarm is to sound .

The L628 features two – line LCD display with backlight and a multi – level adjustable alarm .

( See page 10 for more information ) It is capable of sounding a different tone for selected call points ( doors , drug cupboards , telephone , etc ) and only displaying specific call points ( Zoning ) if required .

More information can be found from page 54. There is an open collector output , which can be connected to the RB1 Relay Board ( See Page 37 ] or used to directly trigger external equipment .

All displays are identical but can be configured on site to operate independently .

 Related Products:

• LBAT
• LBAT7.2
• EXT3
• EXT6
• EM-1090-4060

A display unit is required in every location where calls are to be shown and the alarm is to sound .

The L628 features two – line LCD display with backlight and a multi – level adjustable alarm .

( See page 10 for more information ) It is capable of sounding a different tone for selected call points ( doors , drug cupboards , telephone , etc ) and only displaying specific call points ( Zoning ) if required .

More information can be found from page 54. There is an open collector output , which can be connected to the RB1 Relay Board ( See Page 37 ] or used to directly trigger external equipment .

All displays are identical but can be configured on site to operate independently .

  Related Products:

• LBAT
• LBAT7.2
• EXT3
• EXT6
• EM-1090-4060

The L753 Audio Call Point is required for every individual call location on the system where the two way intercom facility is required .

It features seven levels of call , hands free two way Intercom , integral infra – red receiver , audio page facility , audible call re – assurance , re – assurance LED and ‘ call follower sounder .

Emergency call is generated by pressing the Call and Reset Button simultaneously , and the voice Intercom facility is only available for Call and Staff Assistance calls .

The industry standard trigger socket will accept pear leads , pressure mats , portable radio triggers and a host of other triggering devices .

The unit flush and surface mounts into a standard double gang backbox Please refer to the infor.

 Related Products:

• VISTA SERIES NURSE CALL SYSTEM
• AUDIO-VISUAL NURSE CALL SYSTEMS
• Medical-Grade Touch Screen
• Analog Nurse Call Systems.
• Nurse Call Communications
• Welcome the MICRA Master Station

The L7700 has the capacity to power an entire Intercall system with provision in the enclosure to accommodate a
12Volt 12AH battery for system backup requirements.

The unit features an integrated embedded web server used to
configure the system configuration, datalog access and remote monitoring.

The Ethernet port may be used to connect
IP controllers together, provide an interface to other Intercall IP devices and for connection to third party products
such as IP/DECT phones & message paging etc.

In addition, the unit features; onboard calendar clock and disk drive
which records all system activity and configuration settings. Day/Night alarm settings may be automatically switched
by the on-board clock or by manual switch.

The unit features programmable volt free contact inputs and a volt free
contact output together with an RS232 output which can be configured for many baud rate and data formats.

The
integral float charger supports a single 12Volt 12AH battery and the AC, DC, Battery and Earth continuity are
monitored continuously.

IMPORTANT The L7700 is Not compatible with the L737 Booster Power Supply.

  Related Products:

• THE ULTRA SYSTEM
• THE MICRA SERIES
• L617
• L717
• L737
• L7700
• L622
• L628