HIGH DENSITY UNIVERSAL READER CONTROLLER

The URC-2004 Universal Reader Controller allows control of four access control points (doors). It utilizes flash firmware for easy upgrades, and employs fully distributed intelligence for off-line operations. Decisions such as access level changes, schedule activation and card expiration are made by the URC-2004 controller without the need of a computer.

The panel contains on-board clock and memory backup as well as thermal overload protection. URC-2004 supports fully supervised communication via RS-485 and TCP/IP with selectable communication speed up to 56.6Kbps.

Connect to the Integra32 Server PC via LIF-200 TCP/IP Gateway or directly via a USB/RS485 converter, for a total of up to 8 panels per controller network.

Each URC-2004 Universal Reader Controller has a capacity of storing 3,000 unique 10 digit card numbers, 10 unique site codes and 3,000 off line transactions in its event buffer. In addition Each URC-2004 Universal Reader Controller can simultaneously read up to 5 distinct Wiegand or Clock & Data card formats.

The URC-2004 has 8 fully programmable four state monitoring, NO / NC supervised inputs & 8 fully programmable Fail Safe / Fail secure outputs (4 x 5A @ 30VDC SPDT dry contacts and 4 x 12VDC 100mA electronic drivers).

The URC-2004 Universal Reader Controller includes a lockable metal enclosure and a built in 2A 12VDC power supply. Also available as a convenient KIT.

Related Products:

• UNC100 Universal Network Controller
• UNC-500 Universal Network Controller
• IOC16M Input / Output Controller
• RC2M Reader Controller
• IRC-2000
• IRC-2000-UL
• AX-NIRC-2000
• URC-2002
• AX-NURC-2002
• URC-2004
• AX-NURC-2004
• URC-ELV8-1
• URC-ELV8-2
• URC-2008
• URC-2003
• NURC-2003
• URC-2005
• NURC-2005
• PC-100 ASCII Gateway
• RBH-AXS-LCD4 Alarm Keypads

• Small footprint
• Simple to install
• Optimal capacity
• Distributed architecture
• Flash Firmware updates
• Built-in clock and calendar
• Expandable to 32 floors
• LOW COST!

Related Products:

• UNC100 Universal Network Controller
• UNC-500 Universal Network Controller
• IOC16M Input / Output Controller
• RC2M Reader Controller
• IRC-2000
• IRC-2000-UL
• AX-NIRC-2000
• URC-2002
• AX-NURC-2002
• URC-2004
• AX-NURC-2004
• URC-ELV8-1
• URC-ELV8-2
• URC-2003
• NURC-2003
• URC-2005
• NURC-2005
• PC-100 ASCII Gateway
• RBH-AXS-LCD4 Alarm Keypads

Rezontech Flame detector
RFD-3000X
Highly Advanced Sensor & Optics
Explosion proof IP66/67, NEMA Type 4X
‏Water and dust tight
‏‎

Specifications
Power Capacity: 3000 VA / 2400 W

Input Voltage: 230 V

LCD display

Network Frequency: 40 – 70 Hz

Power Capacity: 1000 VA

Type: Tower

Input Voltage: 230 V

Outlets: 3 x IEC C13

Features:

Intelligent Card Slot: For additional functionality and upgrades

Display: LCD

Use Case: Ideal for small to medium businesses, providing essential power protection for unstable power conditions to ensure consistent and reliable connectivity during critical moments

Specifications

Power Capacity: 6000 VA / 6 kVA

Phase: 1 phase

AC Input Voltage: 220 VAC

AC Output Voltage: 220 VAC

Configuration: 1 phase in / 1 phase out

Features: Includes external battery for extended backup time

shure mvl clip-on microphone:

the headphone jack of a smartphone or tablet and opening recording apps
such as the ShurePlus® MOTIV recording app, the user can easily and discretely capture high-quality audio. It is ideal for use in speech and other applications requiring minimal visibility.

Shure mvl clip-on microphone features:

• Superior audio clarity
• Effective immunity to audible interference
• Low self-noise
• More even, natural response across frequency range
• Less susceptible to distortion
• Matte black, sleek, low-profile design for inconspicuous placement
• Snug-fit foam windscreen provides additional protection from plosives and wind noise
• Includes protective storage pouch, tie clip, and windscreen
• The optional Rycote Mini Windjammer fits over the included windscreen
• Legendary Shure quality and reliability

shure slx wireless systems:

Wireless system offers easy set-up and high audio quality for virtually any application. Features include Automatic Frequency Selection, Automatic Transmitter Set-Up, Predictive Diversity technology, and removable antennas with rack hardware.

Frequency Band Selection

Most countries closely regulate the radio frequencies used in the transmission of wireless Infor mation. These regulations state which devices can use which frequencies, and help to limit the amount of RF (radio frequency) interference in all wireless communications. To be flexible enough to operate worldwide, SLX receivers are available in a number of models, each with a unique frequency range. Each frequency range, or band, spans up to 24 MHz of the

wireless broadcast spectrum.

To facilitate system setup and protect against RF interference, each system comes with multiple predefined frequency groups and channels.

When using a single SLX system, the operating frequency will generally not have to be changed. In an installation with multiple receiver/transmitter systems, each system must operate on a sepa rate channel. The group and channel system provides an optimum frequency spread when using multiple systems.

Within a single frequency band, up to 12 individual transmitter/receiver systems may be used in a single installation. In regions where additional frequency bands are available, it is possible to operate up to 20 systems simultaneously. Check with your local Shure retailer for information on which bands are available in your area

shure slx wireless systems instructions:

Single System Setup
Follow these steps when using a single SLX system : Automatic Frequency Selection Scans for an available channel and sets the receiver to that channel . Automatic Transmitter Setup
1. Turn On the transmitter.
2. Open the transmitter battery compartment to display the infrared ( IR ) port
3. With the IR port exposed to the receiver , press sync .
4. Hold the sync button until the red light stops flashing on both receiver and transmitter .
5. When the receiver ready light glows , the system is ready for use .
6. Close the transmitter battery compartment .

Lifco Supervisory Switch

Lifeco Swing Check Valve

• Meet or exceed the requirements of AWWA C508 Standard.

• Full Waterway

• Disc is fully encapsulated with EPDM rubber

• Superior design featuring exceptionally low pressure losses at high flow rates

• Disassembly of the valve can be performed without removing the valve from the pipe system by unscrewing the bonnet bolts

• Face to face dimensions according to ASME B16.10

• Flanged to ASME B16.1 Class 125, EN 1092-2 PN 16 Other flange types are available on request

• Rated Working Pressure: 350 psi

• Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard

Kentec TK102A1-10 Taktis UL 2 Loop Panel, 0 Zones, Enable Key, M5, 1 Aperture (Surface) – Apollo Protocol

Taktis® is Kentec’s most powerful and sophisticated analogue addressable fire panel. Intelligent and technically robust, it has enhanced integration and networking capabilities to meet the current and future needs of small to larger buildings and installations.

Initially configured as a fire detection and alarm system, the flexibility of Taktis is such that it can be re-configured to realise many other control and indication applications, with direct integration into intelligent buildings.

Available in four and eight slot variants, Taktis fire control panel ranges from two to 16 detection loops. Taktis can network up to 128 panels, making it ideal for the largest sites such as schools, hospitals, multi-site retail/supermarkets, critical infrastructure and major commercial and industrial facilities.

Multiple protocols can be supported on each panel to give installers and end-users maximum choice in their systems’ design, and the scalable nature of the product provides the highest level of future-proofing and networking possibilities.

A-1712 ER

Description

Type: Mixer amplifier with 120 watts of power.

Zones: 2 zones.

Inputs: 9 channels (6 microphone inputs + 3 auxiliary audio sources).

Zone Selection: Capability to select and manage different zones.

Recording Output: Option to add an output for connecting to a recording unit.

Additional Audio Source: Ability to add extra audio sources.

A-2030 H 4

Description

Amplifier Power: 30 watts.

Inputs: 5 channels (3 microphone inputs + 2 auxiliary audio sources).

Additional Features: Capability to add an extra audio source.

BS-1015BSW

Description
Type: Headset with a streamlined design and white color.

Operation at 100V: 15 watts, 10 watts, or 5 watts.

Operation at 70V: 7.5 watts, 5 watts, or 2.5 watts.

BS-633A

Description

Speaker Type: 6-watt speakers with a streamlined design, ideal for mounting on concrete ceilings or walls.

Installation: Suitable for both ceilings and walls.

Operation at 100V: 6 watts, 3 watts, or 1 watt.

Operation at 70V: 3 watts, 1.5 watts, or 0.5 watts.