– 12 W, 36 W and 100 W versions
– Available in power-save or failsafe versions
– Built-in 24 VDC override relay
– Continuous rotating system
– Suitable for 3-wire and 4-wire systems

LBC-114/10 volume controller

– Suitable for speech and music reproduction
– Light weight ABS material
– Easy to install
– Unobtrusive design
– EN 54‑24 certified

– MP3 playback from SD card and USB inputs
– FM tuner with RDS, presets and digital control
– Simultaneous operation of SD/USB-player and FM tuner
– Separate outputs for digital source and FM tuner

– Call station with soft touch button for PAVIRO system
– 15 freely programmable buttons
– Customization via built-in display and keys
– Provision for installing emergency button and key switch
– EN 54-16 system certification

– Compatible with 100 V, 70 V or 50 V loudspeaker lines
– Powering of the module via loudspeaker line (pilot tone)
-Multiple modules at one loudspeaker line possible
– Up to 60 modules can be connected
– EN 54-16

– 2 x 500 W class-D power amplifier (70/100 V output)
– Low power consumption in standby mode
– Excellent sound quality, high signal-to-noise ratio
-EN 54-16 system certification

– Public address and emergency sound system
control unit
– Control and routing of 4 simultaneous audio
channels
– One controller supports 12 zones, expandable
up-to 492 zones with 24-zone routers
– Four controllers can be networked using
OMNEO interface module
– EN 54-16 system certification

LB2 UC 30-L1
* High-fidelity music and speech reproduction
* Selectable 8 ohm, 70 V and 100 V inputs
* Compact yet robust ABS enclosure
* Supplied with adjustable mounting bracket
* Complies with international installation and safety regulations

* High-fidelity music and speech reproduction
* Selectable 8 ohm, 70 V and 100 V inputs
* Compact yet robust ABS enclosure
* Supplied with adjustable mounting bracket
* Complies with international installation and safety regulation

The LBB 1930/20 is a powerful 120 W power amplifier in a
2U high 19” case for rack mounting or tabletop use. LEDs
on the front panel show the status of the amplifier:
power, audio output level, and supervised functions. This
high-performance unit fulfills a wide range of public
address requirements at a surprisingly low cost.

u 480 W power amplifier in a 3U high 19” housing
u EN 54‑16 certified
u 70 V / 100 V and 8 Ohm outputs
u Dual inputs with priority switching
u 100 V input for slave operation on 100 V speaker
line

LBC-3086/41
* The loudspeaker unit is a 6 W, dual-cone loudspeaker with
* an integrated circular metal grille. A 100 V matching
* transformer is mounted on the back. The appearance and
* neutral white RAL color have been selected to be
* unobtrusive in virtually all interiors.
* The loudspeaker has built-in protection to ensure that, in
* the event of a fire, damage to the loudspeaker does not
* result in failure of the circuit to which it is connected. In
* this way, system integrity is maintained, ensuring
* loudspeakers in other areas can still be used to inform
* people of the situation. The loudspeaker has ceramic

Easy to install
Water- and dust protected
Prevents sound traveling via the ceiling cavity to adjacent areas

Mixing Amplifier
* Power: 120 W
* 4 x Microphone line inputs
* 1 x Input with priority
* 1 x Music source input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

Power Mixer
* Power: 360/ 240 W
* 4 Microphone/ line inputs
* One input with priority
* 1 Music input
* All settings adjustable from outside
* Headphones out
* VU Meter
* Loudspeaker out 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm