* High-fidelity music and speech reproduction
* Selectable 8 ohm, 70 V and 100 V inputs
* Compact yet robust ABS enclosure
* Supplied with adjustable mounting bracket
* Complies with international installation and safety regulation

LBC-3086/41
* The loudspeaker unit is a 6 W, dual-cone loudspeaker with
* an integrated circular metal grille. A 100 V matching
* transformer is mounted on the back. The appearance and
* neutral white RAL color have been selected to be
* unobtrusive in virtually all interiors.
* The loudspeaker has built-in protection to ensure that, in
* the event of a fire, damage to the loudspeaker does not
* result in failure of the circuit to which it is connected. In
* this way, system integrity is maintained, ensuring
* loudspeakers in other areas can still be used to inform
* people of the situation. The loudspeaker has ceramic

Mixing Amplifier
* Power: 120 W
* 4 x Microphone line inputs
* 1 x Input with priority
* 1 x Music source input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

Power Mixer
* Power: 360/ 240 W
* 4 Microphone/ line inputs
* One input with priority
* 1 Music input
* All settings adjustable from outside
* Headphones out
* VU Meter
* Loudspeaker out 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

Mixing Amplifier
* 4 XLR microphone line inputs
* 1 Input with priority
* 3 RCA Music Inputs
* 1 RJ45 input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 8 ohms
* Dimensions (H x W x D): 100 x 430 x 270 mm

* 100 V and telephone input with priority & VOX
* 2-tone chime
* 4 microphone/line inputs, plus 3 music source inputs
* Announcement only output, 3-wire volume override
* Outputs for line out and music only out
* Unique easy-to-use intuitive tone controls
* Voice-activated emergency override
* Wide range of power (30, 60 and 120 Watts)

* The mixer amplifier is equipped with an inbuilt music
* source, which can provide hours of uninterrupted
* music either through Bluetooth streaming or USB pen
* drive. It is supplied with an IR remote control for
* controlling the music source. The unit features four
* mic/line inputs, 1 BGM and operates in a single zone.
* To ensure optimum performance, there are no moving
* parts, such as hard drives that can fail or wear out.
* The unit has a limiter circuit and provides an audio
* insert feature to use as a pre/power amplifier. The VU
* meter gives an output level indication.

Input voltage VDC 10 – 30 VDC
Output voltage 10 – 30 VDC
Number of connectable readers 8
Number of Inputs 8
Number of Outputs 8
Display yes
Internal storage (compact flash) 2GB
Reader Interface Wiegand Wiegand RS-485
Max reader cable length 1200m per Bus
Reader operating voltage E-Mail 10-30V DC
Reader monitoring yes
Number of wires per reader 4 + 1
Number of connectable
reader extensions –
Number of connectable
I/O extensions 3
Reader protocol support OSDP, LBUS, MICOS, BG900
Standards CE, UL, VDS

* Intelligent access manager for one to eight entrances
* Four interfaces include the reader power supply
* Standard 2 GB Compact Flash
* LCD display for displaying information
* Self-controlling send and receive switching
* Individual electronic verification of plugs and outputs
* Input for an externally connected tamper contact

* RS485 connection to the AMC2 4W controller
* 4 Wiegand reader interfaces
* 8 analog inputs
* 8 relais outputs (wet or dry)
* Status of inputs and outputs shows on AMC2 4W LCD display
* Transfer rate to EXT interface (RS485): 9,6 kBit/sec

ARD-AYBS6260 proximity reader
* RS485/OSDP and 26 Bit Wiegand interface
* Supports the data record of Bosch coded MIFARE classic cards and keyfobs and CSN of ISO14443A credentials
* Three LED indicators and a beeper give clear feedback to the user during operation
* IP65 rated for indoor and outdoor use
* Wall or mullion mount
* Tamper switch

Bosch ARD-EntryProx compact card reader with keypad
* Compact access terminal (surface-mounted) with reader unit for proximity cards and keypad for PIN code entry and configuration
* Self-sufficient operation
* Transaction memory for a maximum of 1000 transactions; transaction consists of personal ID, time, date and type of transaction
* Maximum of 2000 personal IDs
* Configurable PIN code block after a specified number of incorrect entries
* Quick personal activation by showing card
* Alarm via auxiliary relay
* It is possible to connect it to an access controller via the Wiegand interface

ARD-FPBEW2-H2 fingerprint reader
* Compatibility with AMS 2.0, BIS/ACE 4.5 and later versions, for easy enrollment and configuration of fingerprint templates as well as card data in one system
* Highest security standard supporting OSDPv2 secure channel protocol and Bosch coded Mifare Desfire credentials
* Flexibility due to Wiegand and OSDP support, and dual-frequency RFID technology supporting proximity cards and smart cards
* Rugged IP67/IK09 housing for tough environment and outdoor installations

▶ 120 W power amplifier in a compact housing
▶ 70 V / 100 V and 8 ohm outputs
▶ Dual inputs with priority switching
▶ 100 V input for slave operation on 100 V speaker line
▶ Temperature controlled forced front to back
ventilation, directly stackable.
▶ Mains, battery back-up and pilot tone supervision
▶ EN 54‑16 and EN 60849 compliant

bosch 1080p60 for highly detailed images
Starlight camera technology with excellent low-light
performance
IVA Pro brings highly reliable deep-learning based
detection of persons and vehicles to scenes ranging
from sterile zones to crowded and congested
High Dynamic Range to see every detail in both
bright and dark areas of the scene
Built-in intelligent IR illuminator with up to 45 m
(148 ft) viewing distance