Gent COMPACT-PLUS Vigilon Compact Plus 1-2 Loop Control Panel with 1 Loop Card
Vigilon Plus Control Panels are available in 3 sizes managing 2, 4 or 6 loops each accommodating up to 200 devices including advanced fire sensors, interfaces, call points, alarm sounders and visual alarms. The Compact Plus 2 loop panels and Vigilon Plus 4 loop panels are available with integrated 24 hour standby and the 6-loop panel has full 72 hr standby capacity

The Gent S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and visual alarms. The sounders shall be capable of providing 3 different sound signals, which are selected/configured via the main control panel. Configuration of sounder patterns will not be carried out locally at individual sounders. In order to meet with the requirements of BS5839 Part 1, the frequency of sound signals emitted will be as follows:
Features & Benefits:
* 200 per loop
* Red & White options
* 103dbA at 1 metre
* 3 Sound signals
* 2 integral Line Isolators

The S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.
The S4-710 is a truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.

S4-34845 Manual Call Point with Protective Cover & Resettable Element
The S4-34845 is a Addressable Manual Call Point (MCP) from the Gent range. The S4-34845 has an response time of less than 1 second. The S4-34845 Manual Call Point comes with a protective cover and also comes with the resettable element, which can be done at any given time using a Call Point Test Key seen in the related products.
The Addressable Range of Gent Manual Call Points (MCP) are for the Vigilon and Nano System, which are easy to install and have the ability to be mounted on standard installation back boxes or they can be mounted on bespoke red back boxes for surface mounting.

• Complete range of sensors with
combinations of advanced sensing
technologies including heat, dual angle
optical scatter and carbon monoxide (CO)
• Combined sensing of carbon monoxide with dual angle optical scatter and heat
allows a higher level of false alarm immunity in presence of steam
and while still maintaining the integrity of detecting fi res
• Each sensor has certifi ed sensitivity settings that suit
certain environments/ applications and may
be programmed for different times of the day if required
• Short circuit Isolator in each device
• Confi gurable input/ output connection for remote indicator or
supervisory input fully synchronised sound
patterns via the control panel
• Sensor sounders have adjustable sound level
and tones to match system sounders
• Sounder element monitoring and over-load protection
to ensure operation even in event of cable fault
• Sound output synchronised and compatible with
S-Quad range of EN54-23 VADs.

  Related Products:

• S-Quad Multi-Sensor with                       Integrated Sounder and Visual
• Alarms Device (VAD)                               S-Cubed
• Analogue Addressable Manual               Call Points
• Beam Sensors                                             SAFE Solution
• Loop Powered Interfaces                         Mains Switching Interface
• Mains Powered Interface                         34000 S-Quad Adapter Base.
• S-Quad Anti-Ligature Base                      EN54-4 Approved Power Supply Units
• Electromagnetic Door Holders               Transformer Rectifier 24v Door Retainer
• Fire System Document Box                     PAGING
• RESPONSE AID                                        PAGING
• RESPONSE PLUS                                     Response Plus
• RECHARGEABLE TFT                            DISPLAY PAGER
• PAGING

• Integral EN54-4 PSUand battery standby for 24 hours (4 loop)
• Integral EN54-4 PSU for 72 hours with external batteries (6 loop)
• Vigilon’s advanced sensing technology and powerful software
processing in the panel quickly identifies real fires
• PC based commissioning tools
allow complex fire plans to be configured
• Advanced loop card technology allows for
system status monitoring and diagnostics
• Extended event log using flash memory card
• The control panel has a simple user interface
with LCD screen providing accurate information in an emergency
• Multiple panel networks can be programmed
seamlessly as one system, allowing for
flexible design and system management
• Flexible programming options are available at the panel
• All Vigilon devices connect onto the same
two core loop, separate sounder or
repeater panel wiring circuits are not required
• In the event of a fire or fault, Vigilon’s analogue addressable
technology will provide a detailed log of events
• PC based Graphics user interface (GUI) available

  Related Products:

• BACnet Gateway                                Single Mode FibreVisual Alarm Devices
• Advanced Vigilon Loop Card          Nano Control Panel
• Vigilon Plus Control Panels            Non-Addressable Audible
• Visual Devices                                    Electronic Bells
• Xenex Control Panel                        Conventional Manual Call Points
• ES Detect                                            Non-Addressable Audible
• Visual Alarm Devices                       Non-Addressable Audible
• Visual Alarm Devices                       FAAST
• AUTOMATIC                                     PURGING UNIT
• SAMPLING HOLE                            IDENTIFICATION
• VESDA

• Updated Modern Aesthetics
• Small profile devices for Horns and Horn Strobes
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 30
candela
• Field-selectable candela settings on wall units:
15, 30, 75, 95, 110, 135, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Mounting plate for all standard and all compact wall units
• Mounting plate shorting spring checks wiring continuity before
device installation
• Electrically Compatible with legacy SpectrAlert and SpectAlert
Advance devices
• Compatible with MDL3 sync module
• Listed for wall mounting only

   Related Products:

• InnovairFlex Intelligent Duct Smoke Detector
• InnovairFlex® D355PL Photoelectric Duct Smoke Detector3
• Analog Input Device Control Card
• Eight balanced input module
• Loop Control Module
• Time Control Module
• Remote module

• Enclosure available in red or light gray
• Produces audio feedback
• Accepts the user codes or the fire fighter’s key
• Offers an RS-485 interface to the panel
• Displays large keypad buttons for system reset and silence
• Includes the following five status LEDs:
– alarm
– supervisory
– trouble
– silence
– AC power conditions
• Has an 80-character backlit LCD display that shows 4 lines with 20 characters on each line
• The remote annunciator operation and appearance is
identical to the GWF-7075 built-in annunciator
• Installs up to eight RA-1000s per GWF-7075
• Supports a simultaneous use of multiple RA-1000s
• Provides an on-board piezo sounder with
audio that broadcasts alarms, troubles, and supervisories
• Use wiring lengths up to 6,000 ft. from the
FACP (depending on the wire gauge and the number of devices on the SBUS)

   Related Products:

• Digital Key Module DKM18 for redundant call stations
• DCS15 Control Panel
• MS-5024 and MS-5024UD Replacement Motherboard
• APA151 Piezo Annunciator
• InnovairFlex™ D4P120 Power Board Component
• InnovairFlex™ D2 2-Wire Photoelectric Duct Smoke Detector
• InnovairFlex™ D4S 4-Wire Photoelectric Sensor
• Carbon Monoxide Detector
• i4 Series CO/Smoke Detector Replacement CO Sensor
• i4 Series Combination CO/Photoelectric Smoke Detector

Horing iR flame detector
LPCB approved
Characteristics
• Built-in high performance Microprocessor
that able to analysis flame signal more
accuracy.
• IR sensor has better detection range than
UV sensor.
• High immunity to sunlight or other noisy
source.
Applications
• Premises with higher ceilings: theater, gym, storage, gallery or
warehouse, etc.
• Places where fires happen easily: places storing with combustible
goods, gas stations, factory working places, machine rooms, etc.
• Ventilate places: open markets, station platforms, hotel lobbies,
department stores, etc. (places that smoke and heat can not gather
during early period of fire)
• Others: tunnels, computer rooms, etc.

• Rotary address switches for fast installations
• Reliable analog communications for trouble free
operation
• Configured by the compatible Fire Alarm Control
Panels for distinct methods of operation
• Age resistant polymer housing
• Dual electronic thermistor design eliminates
directionality
• Superior EMI resistance for reliability
• Microprocessor based design to provide maximum
features
• Simple field cleaning for code compliance
• Dual LED indicators for 360° visibility
• On board drift compensation reduces maintenance
• Transmits signal to indicate maintenance required
• Detector sensitivity increases in hot fires
• Transient smoke conditions are ignored

  Related Products:

• TX3-TOUCH-S15B-WR               TX3-TOUCH-S15S-WR
• TX3-TOUCH-F22-E                     TX3-TOUCH-S22-E
• TX3-T-KIOSK2                             TX3-TOUCH-ADV
• TX3-TOUCH-S15-D                     TX3-TOUCH-F15-D
• MiENTRY APP                              TX3-NANO-S4
• TX3-120C-C                                   TX3-120U-C
• TX3-200-8C-C                              TX3-200-8U-C
• TX3-2000-8C-C                            TX3-2000-8U-C
• TX3-200-4U-C                              TX3-2000-4U-C
• TX3-NSL-12K-C

• Sleek low profile design
• Remote output can be controlled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion sources
• MODEL OPTION – Short-circuit isolator (MIX-4030-ISO)
• Heat and heat rate of rise detection
• Selectable high (175F) and low (135F) heat
detection alarm thresholds

Related Products:

• TX3-EMER-1S
• DOOR ALARM STATION
• EMERGENCY CALLING COMPONENTS
• EMERGENCY NURSE CALL SYSTEM
• TX3-ER-8-B

• Flexible application
• Up to 240 units per loop
• Indicating LED provides module status
• Mounts in a standard 4” square backbox
• Can handle Class A or Class B device wiring.
No external components required for class A
operation

Related Products:

• Designed to meet a wide range of applications
• SEMS screws for easy wiring
• Panel controlled status LED (except MIX-M501M)
• Analog communications
• Rotary address switches (except MIX-M500X)
• Low standby current
• Mounts in 4” square junction box

  Related Products:

• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• MR-100/MR-200 SERIES
• UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
• DH SERIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• BC-160
• BPS POWER SUPPLIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE

• Dual Action
• Key resettable
• Terminal connectors
• Gold plated SPST contacts
• Optional auxiliary contacts
• High-gloss red enamel finish
• Plastic breakrod
• Meets ADA 5 lb. maximum manual-force
• Mounts on standard single gang box, Mircom’s
BB-700 surface metal backbox or BB-700WP
weather proof backbox

 Related Products:

• EL-7008MA EDGE-LIT LED RUNNING MAN SIGN – ALUMINUM
• ELRM-100S STEEL RUNNING MAN SIGN
• ELRM-180-18RCS LED STEEL RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
• EL-7008M SLIM LED RUNNING MAN SIGN
• ELRM-100 LED RUNNING MAN SIGN
• ELRM-180-2RC LED RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
• EL-100SR STEEL LED EMERGENCY EXIT SIGN
• EL-180-18RCS STEEL LED RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
• EL-7007RX LED EMERGENCY EXIT SIGN
• EL-7008R SLIM LED EMERGENCY EXIT SIGN

The Mini Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches.

Built-in isolator
Tri-coloured LEDs status reporting
Ground fault detection
Easy to install
Interrupt facility
Selectable priority of inputs