The LBB 1930/20 is a powerful 120 W power amplifier in a
2U high 19” case for rack mounting or tabletop use. LEDs
on the front panel show the status of the amplifier:
power, audio output level, and supervised functions. This
high-performance unit fulfills a wide range of public
address requirements at a surprisingly low cost.

u 480 W power amplifier in a 3U high 19” housing
u EN 54‑16 certified
u 70 V / 100 V and 8 Ohm outputs
u Dual inputs with priority switching
u 100 V input for slave operation on 100 V speaker
line

Mixing Amplifier
* Power: 120 W
* 4 x Microphone line inputs
* 1 x Input with priority
* 1 x Music source input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

Power Mixer
* Power: 360/ 240 W
* 4 Microphone/ line inputs
* One input with priority
* 1 Music input
* All settings adjustable from outside
* Headphones out
* VU Meter
* Loudspeaker out 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

Mixing Amplifier
* 4 XLR microphone line inputs
* 1 Input with priority
* 3 RCA Music Inputs
* 1 RJ45 input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 8 ohms
* Dimensions (H x W x D): 100 x 430 x 270 mm

* 100 V and telephone input with priority & VOX
* 2-tone chime
* 4 microphone/line inputs, plus 3 music source inputs
* Announcement only output, 3-wire volume override
* Outputs for line out and music only out
* Unique easy-to-use intuitive tone controls
* Voice-activated emergency override
* Wide range of power (30, 60 and 120 Watts)

* The mixer amplifier is equipped with an inbuilt music
* source, which can provide hours of uninterrupted
* music either through Bluetooth streaming or USB pen
* drive. It is supplied with an IR remote control for
* controlling the music source. The unit features four
* mic/line inputs, 1 BGM and operates in a single zone.
* To ensure optimum performance, there are no moving
* parts, such as hard drives that can fail or wear out.
* The unit has a limiter circuit and provides an audio
* insert feature to use as a pre/power amplifier. The VU
* meter gives an output level indication.

* 4 microphone / line inputs, plus music source input
* Announcement only output, 3‑wire volume override
* Wide range of output power (60 Watts)
* 2‑tone chime

u MP3 playback from SD card and USB inputs
u FM tuner with RDS, presets and digital control
u Simultaneous operation of SD/USB player and
FM tuner
u Separate outputs for digital source and FM
tuner

▶ 120 W power amplifier in a compact housing
▶ 70 V / 100 V and 8 ohm outputs
▶ Dual inputs with priority switching
▶ 100 V input for slave operation on 100 V speaker line
▶ Temperature controlled forced front to back
ventilation, directly stackable.
▶ Mains, battery back-up and pilot tone supervision
▶ EN 54‑16 and EN 60849 compliant

Power Mixer
* Power: 360/ 240 W
* 4 Microphone/ line inputs
* One input with priority
* 1 Music input
* All settings adjustable from outside
* Headphones out
* VU Meter
* Loudspeaker out 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

– 2 x 500 W class-D power amplifier (70/100 V output)
– Low power consumption in standby mode
– Excellent sound quality, high signal-to-noise ratio
-EN 54-16 system certification

60W / 120W amplifiers :
– Micro – switches for setting priorities and input functions
– Up to 8 desk microphone with cascade connection
– TEL / EMERG input for emergency calls with input level and activation threshold ( A.P.T. ) adjustment
-Line auxiliary output
– Loudspeakers line outputs ( constant voltage 50-70-100V / low Impedance 8 Ohm )
– Terminal strip for 24Vdc external power supply
– Terminal strip for precedence connection
– Warning signal ( chime ) level adjustment
-FBT AMPLIFIERS MPA5480-MPA5240-MXA1120-MDS SERIES

• 60W / 120W amplifier
• 1 XLR microphone input with Phantom power supply for desk microphones MBT 1101 series (RJ45, CAT5 SFTP cable)
• 1 MIC/LINE input with Phantom, MIC, or LINE selector
• 2 XLR balanced microphone inputs with Phantom power supply
(MIC1 with A.P.T. adjustment)
• 2 AUX inputs for sound sources (TAPE/CD)
• Micro-switches for setting priorities and input functions
• Up to 8 desk microphones with cascade connection
• TEL/EMERG input for emergency calls with input level and activation
threshold (A.P.T.) adjustment
• Line auxiliary output
• Loudspeakers line outputs (constant voltage 50-70-100V / low impedance 8 Ohm)
• Selectable 230/115Vac and 24Vdc mains power supply
• Warning signal (chime) level adjustment

240 W power amplifier in a 2U high housing
EN 54‑16 certified
70 V / 100 V and 8 ohm outputs
Dual inputs with priority switching
100 V input for slave operation on 100 V speaker
line