Showing 1–15 of 26 results
58000-300 CO DETECTOR
XP95, Discovery and
CoreProtocol® compatible
The Discovery Carbon Monoxide (CO) Detector is an analogue
addressable fire detector that has the features that follow:
•
Early warning of carbon based smouldering fires
•
Resistance to false alarms in areas with high levels of
steam and other airborne particles
•
Ideal for protecting small volume sleeping risk areas
•
Resistance to contamination in dirty and dusty
conditions
•
Excellent supplement to fire detection systems to
improve detection of smouldering hydrocarbon fires
AUTO-DIALER 911 Microchip Automatic Alarm Instrument, CCTV�Security Alarm Automatic System�RecordingDuration:20 seconds, telephone numbers and audio�information�Remain intact even ifthe power is off, 4 groups of telephones and�each group is able to save as long as 16 digits.
The XP95A Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 135°F.
Reliable fire detection in areas with a wide temperature range from 32°F to 151°F
Ideal for environments that are dirty or smoky under normal circumstances
Unaffected by wind and atmospheric pressure
Alarm flag for fast alarm responding
The XP95A Photoelectric Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
Reliable fire detection in areas with a wide temperature range from 32°F to 100°F
Ideal for escape routes
Unaffected by wind and atmospheric pressure
Insect resistant screen
Consilium fds 303 IR3 flame detector 🔥🔥
High performance hydrogen flame detection.
The FDS303 complements the CD-F-301 and
CD-F-300 Visual Flame Detectors by delivering
superior performance in the detection of
hydrocarbon fires which are not detectable in the
visible spectrum. The FDS303 utilizes the latest IR
flame detection algorithms to ensure maximum
false alarm immunity.
Applications
Typical applications include:
• On/Offshore Oil and Gas processing facilities
• Refineries
• Petrochemical plants
• Chemical facilities
• Chemical facilities
• Pharmaceutical
• Pharmaceutical
• Aircraft hangars
• Road tunnels
• Road tunnels
• Power generation
• Tank farms
• Tank farms
• Road and rail loading racks
• LNG / LPG
• LNG / LPG
• Warehouses/storage areas
• Waste recycling/b
Features and Benefits
• Multi spectrum IR design delivers long
detection distances and enhanced false alarm
immunity
• Continuous optical test, without a reflector
ο Verifies operation and improves device
up-time
The Fgard IR3 delivers superior performance in the detection of hydrocarbon fires, using the latest infrared (IR) flame detection algorithms to minimise the risk of false alarms.
The Fgard IR3 has been independently tested to demonstrate it can detect a hydrocarbon fuel pan fire at nearly 200 feet in less than 5 seconds, maximising the time you have to respond in an emergency.
Its multi-spectrum IR will detect all hydrocarbon fires with intelligent heated optics, meaning no condensation, ice or water affecting detection. Plus, its advanced optical verification checks cleanliness of the lens and electronic circuitry, meaning no reflector optical check is needed, and a large optical surface results in far fewer false alarms.
Applications
Typical applications include:
� On / Offshore Oil and Gas
Processing Facilities
� Refineries
� Petrochemical Plants
� Chemical Facilities
� Pharmaceutical
� Aircraft Hangars
� Road Tunnels
� Power Generation
� Tank Farms
� Road & Rail Loading Racks
� LNG / LPG
� Warehouses / Storage Areas
� Waste Recycling / Biomass Plants
� Printing Industry
Features and benefits
� Multi Spectrum IR design delivers long detection
distances and enhanced false alarm immunity
� Continuous optical test, without a reflector
•Verifies operation and improves device up-time
� Microprocessor controlled heated optics
•Maintains operation in harsh weather
conditions (snow, ice, condensation)
� International hazardous area approvals
•FM / ATEX / IEC Ex / INMETRO / PESO
� Certified performance testing to multiple fuels
•FM 3260
•EN 54-10
� Adjustable sensitivity levels
•For application flexibility
•Ensure detectors do not cross vote
� External testing with a long-range flame simulator
•Minimises the need for scaffolding
� Easy integration using industry
standard outputs:
•Alarm and Fault Relays
•4-20mA
•HART®, as standard
� Certified SIL 2 Capable
•5-year warranty
• Investment-forward Platform Designed for the Future
Protects the past with backwards compatibility
for EST3 retrofits, flexible feature set.
• On-board Webserver
Remote device-independent access to system status reports.
• Built-in E-mail and E-mail-to-SMS Messaging
Instant notification of specific event types
sent to appropriate personnel.
• Large Full-color LCD Touch Screen with Tactile Buttons
Fast, intuitive access to service and responder functions.
• Five-color LED Indicators
System status at a glance, select the color needed
during programming, reduces replacement part
inventory, maximizes use of available infrastructure.
• Network data, audio data, and telephone
data share a single twisted pair or single fiber strand
Up to 75 percent less cabling, substantial
cost savings in material and labor.
• Backwards Compatibility with EST3
Wiring, devices, and most local rail modules are
backward compatible, providing easy migration
paths, economical transition to new technology.
• Existing Systems Supporting only
Network Data can also Support Voice Audio
Upgrades add value and extend capabilities in retrofit situations.
Related Products:
- EST3 EST3X
- iO SERIES Amplifiers
- Annunciators (R-Series) Batteries and Power Supplies
- Pull Stations Beam & Duct Detectors
- SCALABLE ASPIRATING DETECTION ModuLaser® Aspirating Smoke Detection System
- VESDA by Xtralis® ModuLaser® Aspirating Smoke Detection
- ModuLaser® Aspirating Detection CONFIGURATION IS KEY
- Genesis LED Series Genesis Outdoor Series
- Universal Room-Side Wiring Plate G4SE Strobe Expander
- Interchangeable Covers
• Next Generation Detection Technology
• Integrates optical smoke with rate-of-rise heat sensing
• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration
• Uses existing wiring
• Automatic device mapping
• Sensor Markings Provide Easy Testing Identification
• Up To 250 Total Signature Addresses Per Loop
• Two levels of environmental compensation
• Two levels of dirty detector warning
• Twenty pre-alarm settings
• Five sensitivity settings
• Non-volatile memory
• Electronic addressing
• Environmental compensation
• Automatic day/night sensitivity adjustment
• Bicolor (green/red) status LED
• Standard, relay, fault isolator, and audible mounting bases
Related Products:
- SPECIFY A SIGNATURE SOLUTION Signature Optica™ Smoke Detectors
- Signature Optica™ Smoke and Heat Detectors Signature Optica™ Smoke, Heat, and Carbon Monoxide Detectors
- Signature Intelligent Multisensor Detectors Signature Optica™ Smoke and Carbon Monoxide Detectors
- Intelligent Input & Output Modules Pull Stations
- Specialized Signature Optica™ Multisensor Detectors
- Signature Optica™ Senior Living Signature Optica™ Overview
- INTELLIGENT SOLUTIONS CONVENTIONAL SOLUTIONS
- ASPIRATING DETECTION Signature Optica™ Overview
- Signature Optica™ Multisensor Detectors Signature Optica™ Steam Test
- SPEAKER-STROBE APPLIANCES HORN-STROBE APPLIANCES
- VOICE COMMUNICATIONS SYSTEMS Genesis™ LED Notification Appliances.
- Mass Notification System Planning Universal Room-Side Wiring Plate
- G4SE Strobe Expander Interchangeable Covers
JSB Optical Smoke Detector
A comprehensive range of conventional detectors are available for the JSB EFX2200 range of fire detection panels.
Features:
* LPCB 3rd party approved
* Low profile design
* 360° viewable LED design
* Removable detector chamber for cleaning
* Common mounting base
* New enhanced detectors feature Drift compensation and Chamber monitoring (FXN533 & FXN632)
- The reliable sensor principle for consistent
response performance at the highest level of
security against false alarms
- Loop powered – no need for external power supply
• Individual control of the sounder
• Tones can be used for other purposes in addition to
warning of fire, making the device ideal for use in
schools (school bell) etc.
• Soft start option, ideal for hospitals and nursing homes
• No additional short address
• Automatic synchronization of various IQ8Quad alarm signaling devices
• Maximum sound level: 92 dB (A) at 1 m
• Maximum sound pressure can be set
• Multiple signal components can be combined to one signal template
• Signal template and repetition rates can be set
• Up to 26 different languages are available
• 20 different signal tones, incl. DIN-tone
• Low power consumption
The Honeywell FSL100 Series Flame Detectors are Optoelectronic flame detectors for a wide range of Light Industrial fire detection from Honeywell Analytics.
Honeywell’s FSL100 range of Light Industrial/Commercial Flame Detectors enables simple coverage of fire hazard areas across many fire hazard applications. Installation, set-up and operation are simple. Wide solid area coverage and fast speed of response optimise safety. With inbuilt automatic test and test lamps available to cover all models, reliability is ensured.
A range of middle-market Optical Flame Detectors join the HA FSX High-End products. Addresses a wide range of fire protection applications both indoors and outdoors. With 3 versions to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).
Detecting a wide range of Hydrocarbon and Non-Hydrocarbon flaming fires means that many application areas can be addressed. Wide viewing angleOptical detection of radiant energy in a solid angle Field of View enables coverage of a large risk area. A simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard. Fast responseFar faster than other technologies, by responding to flaming fires in seconds enabling a more rapid response to danger before the fire can escalate.
FM Class 1, 2 & 3 Div2 can be installed indoors or outdoors and in Hazardous areas typically looking into a Div 1 area from a distance. FM 3260 performance certified to FM 3260 for flame Detector performance. Relay and current output (Fault and Alarm) Analog stepped output and Alarm/Fault relays for simple connectivity. Inbuilt Automatic Test and Simple to use Test LampsFSL100 maintains continuous internal health monitoring. Test lamps enable simple operational and field-of-view testing.
Gent S4-34740 Beam Sensor Pair (Transmitter and Receiver) Excluding Bracket and Base
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensor Pair provides an enhanced solution for linear beam detection for applications where Gent S4 Vigilon point detection is either not practical or economic.
Powered and controlled via the loop, the beam is a market leading device with features such as one man alignment and commissioning which is achieved using the auto gain setting, this ensure the optimum alignment is reached.
Maintenance of the beam is enhanced with a key operated test feature which simulates the obscuration of the beam in a fire.
The Gent loop powered beam is certified to EN54 parts 12 and 17. Compatible with the full range of Vigilon and Nano control panels the S-Quad beam uses the panel software to ensure a fast response to fire while offering software filters to reduce the number of unwanted alarms.
The S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.
The S4-710 is a truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.
