The Honeywell FSL100 Series Flame Detectors are Optoelectronic flame detectors for a wide range of Light Industrial fire detection from Honeywell Analytics.

Honeywell’s FSL100 range of Light Industrial/Commercial Flame Detectors enables simple coverage of fire hazard areas across many fire hazard applications. Installation, set-up and operation are simple. Wide solid area coverage and fast speed of response optimise safety. With inbuilt automatic test and test lamps available to cover all models, reliability is ensured.

A range of middle-market Optical Flame Detectors join the HA FSX High-End products. Addresses a wide range of fire protection applications both indoors and outdoors. With 3 versions to cover a wide range of flaming fires: Ultraviolet (UV), Ultraviolet/Infrared (UV/IR) and Triple Infrared (IR3).

Detecting a wide range of Hydrocarbon and Non-Hydrocarbon flaming fires means that many application areas can be addressed. Wide viewing angleOptical detection of radiant energy in a solid angle Field of View enables coverage of a large risk area. A simple optional mounting bracket allows the FSL100 to be installed and aligned covering the hazard. Fast responseFar faster than other technologies, by responding to flaming fires in seconds enabling a more rapid response to danger before the fire can escalate.

FM Class 1, 2 & 3 Div2 can be installed indoors or outdoors and in Hazardous areas typically looking into a Div 1 area from a distance. FM 3260 performance certified to FM 3260 for flame Detector performance. Relay and current output (Fault and Alarm) Analog stepped output and Alarm/Fault relays for simple connectivity. Inbuilt Automatic Test and Simple to use Test LampsFSL100 maintains continuous internal health monitoring. Test lamps enable simple operational and field-of-view testing.

Gent S4-34740 Beam Sensor Pair (Transmitter and Receiver) Excluding Bracket and Base

Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensor Pair provides an enhanced solution for linear beam detection for applications where Gent S4 Vigilon point detection is either not practical or economic.

Powered and controlled via the loop, the beam is a market leading device with features such as one man alignment and commissioning which is achieved using the auto gain setting, this ensure the optimum alignment is reached.

Maintenance of the beam is enhanced with a key operated test feature which simulates the obscuration of the beam in a fire.

The Gent loop powered beam is certified to EN54 parts 12 and 17. Compatible with the full range of Vigilon and Nano control panels the S-Quad beam uses the panel software to ensure a fast response to fire while offering software filters to reduce the number of unwanted alarms.

The S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.
The S4-710 is a truly intelligent analogue sensor combining local processing in the sensor and the panel to achieve an immediate response to real fires whilst minimising the risk of false alarms.

• Complete range of sensors with
combinations of advanced sensing
technologies including heat, dual angle
optical scatter and carbon monoxide (CO)
• Combined sensing of carbon monoxide with dual angle optical scatter and heat
allows a higher level of false alarm immunity in presence of steam
and while still maintaining the integrity of detecting fi res
• Each sensor has certifi ed sensitivity settings that suit
certain environments/ applications and may
be programmed for different times of the day if required
• Short circuit Isolator in each device
• Confi gurable input/ output connection for remote indicator or
supervisory input fully synchronised sound
patterns via the control panel
• Sensor sounders have adjustable sound level
and tones to match system sounders
• Sounder element monitoring and over-load protection
to ensure operation even in event of cable fault
• Sound output synchronised and compatible with
S-Quad range of EN54-23 VADs.

  Related Products:

• S-Quad Multi-Sensor with                       Integrated Sounder and Visual
• Alarms Device (VAD)                               S-Cubed
• Analogue Addressable Manual               Call Points
• Beam Sensors                                             SAFE Solution
• Loop Powered Interfaces                         Mains Switching Interface
• Mains Powered Interface                         34000 S-Quad Adapter Base.
• S-Quad Anti-Ligature Base                      EN54-4 Approved Power Supply Units
• Electromagnetic Door Holders               Transformer Rectifier 24v Door Retainer
• Fire System Document Box                     PAGING
• RESPONSE AID                                        PAGING
• RESPONSE PLUS                                     Response Plus
• RECHARGEABLE TFT                            DISPLAY PAGER
• PAGING

• Integral EN54-4 PSUand battery standby for 24 hours (4 loop)
• Integral EN54-4 PSU for 72 hours with external batteries (6 loop)
• Vigilon’s advanced sensing technology and powerful software
processing in the panel quickly identifies real fires
• PC based commissioning tools
allow complex fire plans to be configured
• Advanced loop card technology allows for
system status monitoring and diagnostics
• Extended event log using flash memory card
• The control panel has a simple user interface
with LCD screen providing accurate information in an emergency
• Multiple panel networks can be programmed
seamlessly as one system, allowing for
flexible design and system management
• Flexible programming options are available at the panel
• All Vigilon devices connect onto the same
two core loop, separate sounder or
repeater panel wiring circuits are not required
• In the event of a fire or fault, Vigilon’s analogue addressable
technology will provide a detailed log of events
• PC based Graphics user interface (GUI) available

  Related Products:

• BACnet Gateway                                Single Mode FibreVisual Alarm Devices
• Advanced Vigilon Loop Card          Nano Control Panel
• Vigilon Plus Control Panels            Non-Addressable Audible
• Visual Devices                                    Electronic Bells
• Xenex Control Panel                        Conventional Manual Call Points
• ES Detect                                            Non-Addressable Audible
• Visual Alarm Devices                       Non-Addressable Audible
• Visual Alarm Devices                       FAAST
• AUTOMATIC                                     PURGING UNIT
• SAMPLING HOLE                            IDENTIFICATION
• VESDA

Horing iR flame detector
LPCB approved
Characteristics
• Built-in high performance Microprocessor
that able to analysis flame signal more
accuracy.
• IR sensor has better detection range than
UV sensor.
• High immunity to sunlight or other noisy
source.
Applications
• Premises with higher ceilings: theater, gym, storage, gallery or
warehouse, etc.
• Places where fires happen easily: places storing with combustible
goods, gas stations, factory working places, machine rooms, etc.
• Ventilate places: open markets, station platforms, hotel lobbies,
department stores, etc. (places that smoke and heat can not gather
during early period of fire)
• Others: tunnels, computer rooms, etc.

• Sleek, low profile design
• Detectors are equipped with a built-in analog
communications module
• Smoke detectors are available with photoelectric
or ionization technology
• Photoelectric detectors are available with additional
fixed temperature detection
• Heat detectors are available as fixed temperature
or fixed temperature with rate-of-rise detection
• Dual LEDs indicate communications and activate
steady when in alarm
• Low profile base provides easy interchangeability
• Low standby current
• Rotary address switches
• Magnetic test feature
• Superior EMI protection
• Sealed against dirt, insects, and back pressure

• Rotary address switches for fast installations
• Reliable analog communications for trouble free
operation
• Configured by the compatible Fire Alarm Control
Panels for distinct methods of operation
• Age resistant polymer housing
• Dual electronic thermistor design eliminates
directionality
• Superior EMI resistance for reliability
• Microprocessor based design to provide maximum
features
• Simple field cleaning for code compliance
• Dual LED indicators for 360° visibility
• On board drift compensation reduces maintenance
• Transmits signal to indicate maintenance required
• Detector sensitivity increases in hot fires
• Transient smoke conditions are ignored

  Related Products:

• TX3-TOUCH-S15B-WR               TX3-TOUCH-S15S-WR
• TX3-TOUCH-F22-E                     TX3-TOUCH-S22-E
• TX3-T-KIOSK2                             TX3-TOUCH-ADV
• TX3-TOUCH-S15-D                     TX3-TOUCH-F15-D
• MiENTRY APP                              TX3-NANO-S4
• TX3-120C-C                                   TX3-120U-C
• TX3-200-8C-C                              TX3-200-8U-C
• TX3-2000-8C-C                            TX3-2000-8U-C
• TX3-200-4U-C                              TX3-2000-4U-C
• TX3-NSL-12K-C

• Sleek low profile design
• Remote output can be conMiSIP4MiENTRYtrolled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion
sources
• Heat (135F) and heat rate of rise detection
• MODEL OPTION – Short-circuit isolator (MIX-4020-ISO)

• MiENTRY APP
• MiSIP4MiENTRY
• MICONNECT
• MiSIP4PSTN
• 1150 INTERCOM HANDSET
• DO-CR3
• IS SERIES
• KV SERIES
• MA-485 INTERCOM AMPLIFIER

• Sleek low profile design
• Remote output can be controlled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion sources
• MODEL OPTION – Short-circuit isolator (MIX-4030-ISO)
• Heat and heat rate of rise detection
• Selectable high (175F) and low (135F) heat
detection alarm thresholds

Related Products:

• TX3-EMER-1S
• DOOR ALARM STATION
• EMERGENCY CALLING COMPONENTS
• EMERGENCY NURSE CALL SYSTEM
• TX3-ER-8-B

The Mini Switch Monitor Module is a loop-powered device incorporating a monitored input circuit for connection to remote switches.

Built-in isolator
Tri-coloured LEDs status reporting
Ground fault detection
Easy to install
Interrupt facility
Selectable priority of inputs