The innovative design makes the CS series more than just another conference system. With its ECM capsule, intelligent automatic mixing technology and integrated acoustic and mechanical system, the conference system provides turnkey solution with natural, feedback-free audio performance whatever the environment. This conference system is ideal for conferences up to 150 attendees. The system is composed of 1 central unit and up to a maximum of 150 chairman or delegate console.

In-ceiling speaker with metal
grille
• Metal back cover
• Colour white RAL9016,
• Coaxial loudspeaker with 5”
woofer and 1/2” tweeter
• 88dB+/- 3dB sensitivity @1W/1m
• Nominal Power
2,5/5/10/20W/8ohm with
100V/70V line transformer
• Building-in hole 170mm

Rated power : 6 W
Adjustable power : 6-3 W
The CSL106T speaker unit for ceiling-mounting consists of an ABS structure with a white RAL 9016 painted grille. It features a compact size and an excellent acoustic performance

60W / 120W amplifiers :
– Micro – switches for setting priorities and input functions
– Up to 8 desk microphone with cascade connection
– TEL / EMERG input for emergency calls with input level and activation threshold ( A.P.T. ) adjustment
-Line auxiliary output
– Loudspeakers line outputs ( constant voltage 50-70-100V / low Impedance 8 Ohm )
– Terminal strip for 24Vdc external power supply
– Terminal strip for precedence connection
– Warning signal ( chime ) level adjustment
-FBT AMPLIFIERS MPA5480-MPA5240-MXA1120-MDS SERIES

• 60W / 120W amplifier
• 1 XLR microphone input with Phantom power supply for desk microphones MBT 1101 series (RJ45, CAT5 SFTP cable)
• 1 MIC/LINE input with Phantom, MIC, or LINE selector
• 2 XLR balanced microphone inputs with Phantom power supply
(MIC1 with A.P.T. adjustment)
• 2 AUX inputs for sound sources (TAPE/CD)
• Micro-switches for setting priorities and input functions
• Up to 8 desk microphones with cascade connection
• TEL/EMERG input for emergency calls with input level and activation
threshold (A.P.T.) adjustment
• Line auxiliary output
• Loudspeakers line outputs (constant voltage 50-70-100V / low impedance 8 Ohm)
• Selectable 230/115Vac and 24Vdc mains power supply
• Warning signal (chime) level adjustment

2-way system
White or black ABS enclosure
5″ LF woofer
0,75″ HF tweeter
100V Line transformer (15/25/40/50W)
Directional wall mount bracket included
Connection via plug in «euroblock» connector
The FBT 550WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possibility of an 8
Ohm connection. An exclusive fully adjustable support bracket provide a flexible mounting system for virtually any
application. The low frequency section is a 5″ woofer and the high frequency section is a 0,75″ tweeter. The power
selector switch is installed in the rear of the enclosure. The loudspeaker system meets the following performance
criteria: line transformer with power taps for 15/25/40/50W, frequency response from 80Hz to 20kHz (-10dB)

40w 2 WAY BASS REFLEX SPEAKER UNIT
PROJECT 640 6.5 woofer and 1 tweeter passive installation speakers feature a fully adjustable support bracket for easy installation. Connection is via a Euroblock connector. 8 Ohm and 100V – Recommended Amplifier: 80W RMS. Long Term Power:

PROJECT passive installation speakers feature a fully adjustable support bracket for easy installation. Feature a 3.5 woofer and 0.5 tweeter. Connection is via a Euroblock connector

transformer attenuators circuit TL10-RE:

These attenuators enable the sound level in a room to be adjusted by attenuating the sound performance of the speaker units with a transformer in constant-voltage systems (100, 70, 50 V). Each attenuator has an autotransformer, an 11-position switch (10 positions + Off) and front masks. They are available with different output powers, depending on the load that can be connected to them.

Each model (TL10-RE, TL30-RE and TL60-RE) has a by-pass relay able to exclude the attenuator in case of an alarm and/or emergency signal having priority (activation of the relay with a 24 VDC current on an additional two-pole line). They can be easily flush-mounted on a wall using the AC911 box or secured to a wall using the AC913 adaptor.

transformer attenuators circuit TL10-RE 10W Attenuator

The TL10-RE attenuator is equipped with a by-pass relay capable of excluding attenuation in the presence
of alarm and/or emergency signals having priority. It can be easily flush-mounted using the Paso AC911
box or wall-mounted using the AC913 adapte