• Complete range of sensors with
combinations of advanced sensing
technologies including heat, dual angle
optical scatter and carbon monoxide (CO)
• Combined sensing of carbon monoxide with dual angle optical scatter and heat
allows a higher level of false alarm immunity in presence of steam
and while still maintaining the integrity of detecting fi res
• Each sensor has certifi ed sensitivity settings that suit
certain environments/ applications and may
be programmed for different times of the day if required
• Short circuit Isolator in each device
• Confi gurable input/ output connection for remote indicator or
supervisory input fully synchronised sound
patterns via the control panel
• Sensor sounders have adjustable sound level
and tones to match system sounders
• Sounder element monitoring and over-load protection
to ensure operation even in event of cable fault
• Sound output synchronised and compatible with
S-Quad range of EN54-23 VADs.

  Related Products:

• S-Quad Multi-Sensor with                       Integrated Sounder and Visual
• Alarms Device (VAD)                               S-Cubed
• Analogue Addressable Manual               Call Points
• Beam Sensors                                             SAFE Solution
• Loop Powered Interfaces                         Mains Switching Interface
• Mains Powered Interface                         34000 S-Quad Adapter Base.
• S-Quad Anti-Ligature Base                      EN54-4 Approved Power Supply Units
• Electromagnetic Door Holders               Transformer Rectifier 24v Door Retainer
• Fire System Document Box                     PAGING
• RESPONSE AID                                        PAGING
• RESPONSE PLUS                                     Response Plus
• RECHARGEABLE TFT                            DISPLAY PAGER
• PAGING

• Integral EN54-4 PSUand battery standby for 24 hours (4 loop)
• Integral EN54-4 PSU for 72 hours with external batteries (6 loop)
• Vigilon’s advanced sensing technology and powerful software
processing in the panel quickly identifies real fires
• PC based commissioning tools
allow complex fire plans to be configured
• Advanced loop card technology allows for
system status monitoring and diagnostics
• Extended event log using flash memory card
• The control panel has a simple user interface
with LCD screen providing accurate information in an emergency
• Multiple panel networks can be programmed
seamlessly as one system, allowing for
flexible design and system management
• Flexible programming options are available at the panel
• All Vigilon devices connect onto the same
two core loop, separate sounder or
repeater panel wiring circuits are not required
• In the event of a fire or fault, Vigilon’s analogue addressable
technology will provide a detailed log of events
• PC based Graphics user interface (GUI) available

  Related Products:

• BACnet Gateway                                Single Mode FibreVisual Alarm Devices
• Advanced Vigilon Loop Card          Nano Control Panel
• Vigilon Plus Control Panels            Non-Addressable Audible
• Visual Devices                                    Electronic Bells
• Xenex Control Panel                        Conventional Manual Call Points
• ES Detect                                            Non-Addressable Audible
• Visual Alarm Devices                       Non-Addressable Audible
• Visual Alarm Devices                       FAAST
• AUTOMATIC                                     PURGING UNIT
• SAMPLING HOLE                            IDENTIFICATION
• VESDA

• Updated Modern Aesthetics
• Small profile devices for Horns and Horn Strobes
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Automatic selection of 12- or 24-volt operation at 15 and 30
candela
• Field-selectable candela settings on wall units:
15, 30, 75, 95, 110, 135, and 185
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and two volume selections
• Mounting plate for all standard and all compact wall units
• Mounting plate shorting spring checks wiring continuity before
device installation
• Electrically Compatible with legacy SpectrAlert and SpectAlert
Advance devices
• Compatible with MDL3 sync module
• Listed for wall mounting only

   Related Products:

• InnovairFlex Intelligent Duct Smoke Detector
• InnovairFlex® D355PL Photoelectric Duct Smoke Detector3
• Analog Input Device Control Card
• Eight balanced input module
• Loop Control Module
• Time Control Module
• Remote module

• Enclosure available in red or light gray
• Produces audio feedback
• Accepts the user codes or the fire fighter’s key
• Offers an RS-485 interface to the panel
• Displays large keypad buttons for system reset and silence
• Includes the following five status LEDs:
– alarm
– supervisory
– trouble
– silence
– AC power conditions
• Has an 80-character backlit LCD display that shows 4 lines with 20 characters on each line
• The remote annunciator operation and appearance is
identical to the GWF-7075 built-in annunciator
• Installs up to eight RA-1000s per GWF-7075
• Supports a simultaneous use of multiple RA-1000s
• Provides an on-board piezo sounder with
audio that broadcasts alarms, troubles, and supervisories
• Use wiring lengths up to 6,000 ft. from the
FACP (depending on the wire gauge and the number of devices on the SBUS)

   Related Products:

• Digital Key Module DKM18 for redundant call stations
• DCS15 Control Panel
• MS-5024 and MS-5024UD Replacement Motherboard
• APA151 Piezo Annunciator
• InnovairFlex™ D4P120 Power Board Component
• InnovairFlex™ D2 2-Wire Photoelectric Duct Smoke Detector
• InnovairFlex™ D4S 4-Wire Photoelectric Sensor
• Carbon Monoxide Detector
• i4 Series CO/Smoke Detector Replacement CO Sensor
• i4 Series Combination CO/Photoelectric Smoke Detector

Horing iR flame detector
LPCB approved
Characteristics
• Built-in high performance Microprocessor
that able to analysis flame signal more
accuracy.
• IR sensor has better detection range than
UV sensor.
• High immunity to sunlight or other noisy
source.
Applications
• Premises with higher ceilings: theater, gym, storage, gallery or
warehouse, etc.
• Places where fires happen easily: places storing with combustible
goods, gas stations, factory working places, machine rooms, etc.
• Ventilate places: open markets, station platforms, hotel lobbies,
department stores, etc. (places that smoke and heat can not gather
during early period of fire)
• Others: tunnels, computer rooms, etc.

gas extinguishing system:

• UL521 and CE approval
• Up to 500m of sensor cable per zone
• Separate pre-alarm and alarm signals
• Easy programmable interface
• Enclosure temperature alarm
• IP65 rated enclosure
• No nomograms or charts required

• UL and C-UL listed
• 33 sound output settings
• Horn or chime sound output
• Wall or Ceiling mount
• Indoor/outdoor listed. Outdoor installation
requires a weatherproof backbox (ordered
separately)
• Pre-wire back plate
• Universal back plate mounting (single gang,
double gang, octagon,    or 4” square)
• Single screw mounting

Related Products:

• BEAM1224                                 CR/CF-MP SERIES
• D2                                                 D4120
• SD-2 / SD-4 SERIES                 SD-100 SERIES
• MIR-65                                         I3 SERIES
• TD SERIES                                  MS-400(U)
• MS-403/404 SERIES                MS-700 SERIES
• MS-700U SERIES                      XAL-53
• FR-320                                         FX-3500 RCU

• Sleek, low profile design
• Detectors are equipped with a built-in analog
communications module
• Smoke detectors are available with photoelectric
or ionization technology
• Photoelectric detectors are available with additional
fixed temperature detection
• Heat detectors are available as fixed temperature
or fixed temperature with rate-of-rise detection
• Dual LEDs indicate communications and activate
steady when in alarm
• Low profile base provides easy interchangeability
• Low standby current
• Rotary address switches
• Magnetic test feature
• Superior EMI protection
• Sealed against dirt, insects, and back pressure

• Rotary address switches for fast installations
• Reliable analog communications for trouble free
operation
• Configured by the compatible Fire Alarm Control
Panels for distinct methods of operation
• Age resistant polymer housing
• Dual electronic thermistor design eliminates
directionality
• Superior EMI resistance for reliability
• Microprocessor based design to provide maximum
features
• Simple field cleaning for code compliance
• Dual LED indicators for 360° visibility
• On board drift compensation reduces maintenance
• Transmits signal to indicate maintenance required
• Detector sensitivity increases in hot fires
• Transient smoke conditions are ignored

  Related Products:

• TX3-TOUCH-S15B-WR               TX3-TOUCH-S15S-WR
• TX3-TOUCH-F22-E                     TX3-TOUCH-S22-E
• TX3-T-KIOSK2                             TX3-TOUCH-ADV
• TX3-TOUCH-S15-D                     TX3-TOUCH-F15-D
• MiENTRY APP                              TX3-NANO-S4
• TX3-120C-C                                   TX3-120U-C
• TX3-200-8C-C                              TX3-200-8U-C
• TX3-2000-8C-C                            TX3-2000-8U-C
• TX3-200-4U-C                              TX3-2000-4U-C
• TX3-NSL-12K-C

• Sleek low profile design
• Remote output can be conMiSIP4MiENTRYtrolled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion
sources
• Heat (135F) and heat rate of rise detection
• MODEL OPTION – Short-circuit isolator (MIX-4020-ISO)

• MiENTRY APP
• MiSIP4MiENTRY
• MICONNECT
• MiSIP4PSTN
• 1150 INTERCOM HANDSET
• DO-CR3
• IS SERIES
• KV SERIES
• MA-485 INTERCOM AMPLIFIER

• Sleek low profile design
• Remote output can be controlled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion sources
• MODEL OPTION – Short-circuit isolator (MIX-4030-ISO)
• Heat and heat rate of rise detection
• Selectable high (175F) and low (135F) heat
detection alarm thresholds

Related Products:

• TX3-EMER-1S
• DOOR ALARM STATION
• EMERGENCY CALLING COMPONENTS
• EMERGENCY NURSE CALL SYSTEM
• TX3-ER-8-B

• Flexible application
• Up to 240 units per loop
• Indicating LED provides module status
• Mounts in a standard 4” square backbox
• Can handle Class A or Class B device wiring.
No external components required for class A
operation

Related Products:

• Designed to meet a wide range of applications
• SEMS screws for easy wiring
• Panel controlled status LED (except MIX-M501M)
• Analog communications
• Rotary address switches (except MIX-M500X)
• Low standby current
• Mounts in 4” square junction box

  Related Products:

• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• MR-100/MR-200 SERIES
• UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
• DH SERIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• BC-160
• BPS POWER SUPPLIES
• INX-10A INTELLIGENT BOOSTER POWER SUPPLY
• UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE