Showing all 10 results

Fire alarm mircom Analogue LHD
0 out of 5

• UL521 and CE approval
• Up to 500m of sensor cable per zone
• Separate pre-alarm and alarm signals
• Easy programmable interface
• Enclosure temperature alarm
• IP65 rated enclosure
• No nomograms or charts required

Fire alarm mircom FH-340 SERIES
0 out of 5

• UL and C-UL listed
• 33 sound output settings
• Horn or chime sound output
• Wall or Ceiling mount
• Indoor/outdoor listed. Outdoor installation
requires a weatherproof backbox (ordered
separately)
• Pre-wire back plate
• Universal back plate mounting (single gang,
double gang, octagon,    or 4” square)
• Single screw mounting

Related Products:

  • BEAM1224                                 CR/CF-MP SERIES
  • D2                                                 D4120
  • SD-2 / SD-4 SERIES                 SD-100 SERIES
  • MIR-65                                         I3 SERIES
  • TD SERIES                                  MS-400(U)
  • MS-403/404 SERIES                MS-700 SERIES
  • MS-700U SERIES                      XAL-53
  • FR-320                                         FX-3500 RCU

Fire alarm mircom FS-400
0 out of 5

• Compact Design
• Advanced LED technology provides superior
current draw performance
• Lower power consumption per device allows
for more notification appliances per circuit and
reduces the need for external power supplies
• Standard and High candela settings in one unit to
meet virtually any application
– 15, 15/75, 30, 75, 110, 185 cd
• Device settings are located on the back of the
unit to prevent tampering
• Includes shorting clip that allows installers to test
the wiring before the device is installed
• Supports 12 to 22 AWG
• Mount to Mircom BB-400 surface mount back
box, single gang, 4-inch square, double gang,
octagon and 4-inch junction boxes
• All units include universal mounting plate
• Red or white finish
• For indoor applications

Fire alarm mircom MIX-200 SERIES
0 out of 5

• Sleek, low profile design
• Detectors are equipped with a built-in analog
communications module
• Smoke detectors are available with photoelectric
or ionization technology
• Photoelectric detectors are available with additional
fixed temperature detection
• Heat detectors are available as fixed temperature
or fixed temperature with rate-of-rise detection
• Dual LEDs indicate communications and activate
steady when in alarm
• Low profile base provides easy interchangeability
• Low standby current
• Rotary address switches
• Magnetic test feature
• Superior EMI protection
• Sealed against dirt, insects, and back pressure

 

  Related Products:

  • BB-1002WP(R)A – OUTDOOR WEATHER PROTECTED ENCLOSURE
  • RAXN-LCDG REMOTE NETWORK ANNUNCIATOR
  • DSPL-420DS – MAIN DISPLAY MODULE
  • RAX-LCD REMOTE SHARED DISPLAY
  • RAX-LCD-LITE REMOTE LCD ANNUNCIATOR
  • RAM-3318-LCD REMOTE ANNUNCIATOR
  • RAM-1032TZDS-CC CONFORMAL COATED MAIN REMOTE ANNUNCIATOR
  • RAX-1048TZDS-CC CONFORMAL COATED ANNUNCIATOR
  • RAM-1032TZDS MAIN REMOTE ANNUNCIATOR
  • RAX-1048TZDS PROGRAMMABLE REMOTE ANNUNCIATOR
  • IPS-4848DS & IPS-2424DS PROGRAMMABLE INPUT SWITCHES MODULE
  • RAX-332
  • MGD-32
  • AGD-048
  • RA-1000 REMOTE ANNUNCIATOR ENCLOSURES
  • BB-1001WP(R)A – OUTDOOR WEATHER PROTECTED ENCLOSURE

Fire alarm mircom MIX-2251TMB
0 out of 5

• Rotary address switches for fast installations
• Reliable analog communications for trouble free
operation
• Configured by the compatible Fire Alarm Control
Panels for distinct methods of operation
• Age resistant polymer housing
• Dual electronic thermistor design eliminates
directionality
• Superior EMI resistance for reliability
• Microprocessor based design to provide maximum
features
• Simple field cleaning for code compliance
• Dual LED indicators for 360° visibility
• On board drift compensation reduces maintenance
• Transmits signal to indicate maintenance required
• Detector sensitivity increases in hot fires
• Transient smoke conditions are ignored

 

  Related Products:

  • TX3-TOUCH-S15B-WR               TX3-TOUCH-S15S-WR
  • TX3-TOUCH-F22-E                     TX3-TOUCH-S22-E
  • TX3-T-KIOSK2                             TX3-TOUCH-ADV
  • TX3-TOUCH-S15-D                     TX3-TOUCH-F15-D
  • MiENTRY APP                              TX3-NANO-S4
  • TX3-120C-C                                   TX3-120U-C
  • TX3-200-8C-C                              TX3-200-8U-C
  • TX3-2000-8C-C                            TX3-2000-8U-C
  • TX3-200-4U-C                              TX3-2000-4U-C
  • TX3-NSL-12K-C

Fire alarm mircom MIX-4020 MIX-4020-ISO
0 out of 5

• Sleek low profile design
• Remote output can be conMiSIP4MiENTRYtrolled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion
sources
• Heat (135F) and heat rate of rise detection
• MODEL OPTION – Short-circuit isolator (MIX-4020-ISO)

 

  • MiENTRY APP
  • MiSIP4MiENTRY
  • MICONNECT
  • MiSIP4PSTN
  • 1150 INTERCOM HANDSET
  • DO-CR3
  • IS SERIES
  • KV SERIES
  • MA-485 INTERCOM AMPLIFIER

Fire alarm mircom MIX-4030 ISO
0 out of 5

• Sleek low profile design
• Remote output can be controlled by the panel
• Protection against dust and insects
• Devices are soft addressed using an electronic
programmer (MIX-4090)
• Smoke sensing by a wide range of combustion sources
• MODEL OPTION – Short-circuit isolator (MIX-4030-ISO)
• Heat and heat rate of rise detection
• Selectable high (175F) and low (135F) heat
detection alarm thresholds

 

Related Products:

  • TX3-EMER-1S
  • DOOR ALARM STATION
  • EMERGENCY CALLING COMPONENTS
  • EMERGENCY NURSE CALL SYSTEM
  • TX3-ER-8-B

Fire alarm mircom MIX-4046
0 out of 5

• Flexible application
• Up to 240 units per loop
• Indicating LED provides module status
• Mounts in a standard 4” square backbox
• Can handle Class A or Class B device wiring.
No external components required for class A
operation

 

Related Products:

  • EL-7030A UNIVERSAL 1.5W LED EMERGENCY REMOTE HEAD (3.6-24V)
  • EL-7030B UNIVERSAL 2 X 1.5W LED EMERGENCY DUAL REMOTE HEAD (3.6-24V)
  • EL-7061S EMERGENCY BATTERY BACKUP UNIT
  • EL-7006 TWIN SPOT LED EMERGENCY LIGHT
  • EL-7006 TWIN SPOT LED EMERGENCY LIGHT-RC W/REMOTE
  • EL-7012 COMPACT TWIN SPOT LED EMERGENCY LIGHT

Fire alarm mircom MIX-500 SERIES
0 out of 5

• Designed to meet a wide range of applications
• SEMS screws for easy wiring
• Panel controlled status LED (except MIX-M501M)
• Analog communications
• Rotary address switches (except MIX-M500X)
• Low standby current
• Mounts in 4” square junction box

 

  Related Products:

  • INX-10A INTELLIGENT BOOSTER POWER SUPPLY
  • MR-100/MR-200 SERIES
  • UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
  • DH SERIES
  • INX-10A INTELLIGENT BOOSTER POWER SUPPLY
  • BC-160
  • BPS POWER SUPPLIES
  • INX-10A INTELLIGENT BOOSTER POWER SUPPLY
  • UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE

Fire alarm mircom MS-710U
0 out of 5

• Dual Action
• Key resettable
• Terminal connectors
• Gold plated SPST contacts
• Optional auxiliary contacts
• High-gloss red enamel finish
• Plastic breakrod
• Meets ADA 5 lb. maximum manual-force
• Mounts on standard single gang box, Mircom’s
BB-700 surface metal backbox or BB-700WP
weather proof backbox

 

 Related Products:

  • EL-7008MA EDGE-LIT LED RUNNING MAN SIGN – ALUMINUM
  • ELRM-100S STEEL RUNNING MAN SIGN
  • ELRM-180-18RCS LED STEEL RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
  • EL-7008M SLIM LED RUNNING MAN SIGN
  • ELRM-100 LED RUNNING MAN SIGN
  • ELRM-180-2RC LED RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
  • EL-100SR STEEL LED EMERGENCY EXIT SIGN
  • EL-180-18RCS STEEL LED RUNNING MAN SIGN WITH WITH ADJUSTABLE TWIN SPOT LED LIGHTS (REMOTE CAPABLE)
  • EL-7007RX LED EMERGENCY EXIT SIGN
  • EL-7008R SLIM LED EMERGENCY EXIT SIGN