Showing 1–15 of 20 results
Elite RS is a versatile range of UL/FM approved open protocol fire alarm
control panels.
Available with one or two detection loops capable of hosting Hochiki or
Apollo UL devices. Elite RS uses microprocessor-based electronics to provide
a flexible control system with high reliability and integrity.
Suitable for all small to medium sized fire detection systems, Elite RS control
panels can be expanded and networked to become part of significantly larger
systems if the need arises, therefore providing a future-proof solution for any
installation.
With its large graphical display and ergonomic button and indicator layout,
the Elite RS control pabel is simple and straightforward to understand for
installers, commissioning engineers and end users alike.
• Flexible, high specification system
• Very easy to maintain and service
• Suitable for a large range of projects
• No fuses required
• Maintenance free poly switch circuit protection, with
auto reset
• Class change and programmable fire/fault relay as
standard on 2/4 zone and fire and fault on the 8 zone
• Discreet panel design
• Numerical access code (no lost keys)
• The 8 zone variant features configurable zonal relay
card option and interlink
• Supplied complete with battery for 24 hour standby
Related Products:
- Optical smoke beam detector for conventional fire systems
- Remote indicator for conventional fire systems
- Sounder detector base for conventional fire systems
- Ultra-low current sounder for conventional fire systems
- UL optical, photo thermal & heat conventional detector range
- Sounder visual alarm device for conventional fire systems
The Wheelock® ExcederTM Series incorporates high reliability and
high efficiency optics to minimize current draw allowing for a greater
number of appliances on the notification appliance circuit. All strobe
models feature an industry first of 8 candela settings on a single
appliance. Models with an audible feature 3 sound settings (90, 95,
99 dB). All switches to change settings, can be set without the use
of a tool and are located behind the appliance to prevent tampering.
Wall models feature voltage test points to take readings with a
voltage meter for troubleshooting and AHJ inspection.
Related Products:
- Optical smoke beam detector for conventional fire systems
- Remote indicator for conventional fire systems
- Sounder detector base for conventional fire systems
- Ultra-low current sounder for conventional fire systems
- UL optical, photo thermal & heat conventional detector range
- Sounder visual alarm device for conventional fire systems
• Fully passive
• Up to 200 Repeaters can be
connected to the loop
• Surface or semi-recessed
mounting
• 2 x 40 backlit LCD display and
6 supervisory LED’s
• Compact size
Related Products:
- ULFX6000
- ULFX6000RM
- ULMIU872
- ULMCIM
- ULMCIM-C
- ULMCOM
- ULMCOM-S
• Approvals include: UL Standard 1971, UL Standard 1480, New York
City (MEA), California State Fire Marshall (CSFM), Factory Mutual
(FM), and Chicago (BFP) See approvals by model in Specifications
and Ordering Information
• ADA/NFPA/UFC/ANSI compliant
• Meets OSHA 29 Part 1910.165
• Wall mount models are available with Field Selectable Candela
Settings of 15/30/75/110cd or 135/185cd (Multi-Candela models) or
1575cd (Single Candela model)
• Ceiling mount models are available with field selectable candela
settings of 15/30/75/95cd or 115/177cd (multi-candela models)
• Strobes produce 1 flash per second over the regulated voltage range
• 24 VDC with wide UL “Regulated Voltage” using filtered DC or
unfiltered VRMS input voltage
• Synchronize with sync modules or panels with built-in Wheelock
Patented Sync Protocol
• Field selectable taps for 25 or 70 VRMS operation from 1/8 watt
to 8 watts
• High efficiency design for maximum output at minimum wattage
across a frequency range of 400 to 4000 HZ
• Fast installation with IN/OUT screw terminals using #12 to #18
AWG wires
Related Products:
- Sounder detector base for conventional fire systems
- Visual alarm device for conventional fire systems
- UL optical, photo-thermal & heat addressable detector range
- UL optical, photo thermal & heat conventional detector range
- Wheelock Exceder horns
• Investment-forward Platform Designed for the Future
Protects the past with backwards compatibility
for EST3 retrofits, flexible feature set.
• On-board Webserver
Remote device-independent access to system status reports.
• Built-in E-mail and E-mail-to-SMS Messaging
Instant notification of specific event types
sent to appropriate personnel.
• Large Full-color LCD Touch Screen with Tactile Buttons
Fast, intuitive access to service and responder functions.
• Five-color LED Indicators
System status at a glance, select the color needed
during programming, reduces replacement part
inventory, maximizes use of available infrastructure.
• Network data, audio data, and telephone
data share a single twisted pair or single fiber strand
Up to 75 percent less cabling, substantial
cost savings in material and labor.
• Backwards Compatibility with EST3
Wiring, devices, and most local rail modules are
backward compatible, providing easy migration
paths, economical transition to new technology.
• Existing Systems Supporting only
Network Data can also Support Voice Audio
Upgrades add value and extend capabilities in retrofit situations.
Related Products:
- EST3 EST3X
- iO SERIES Amplifiers
- Annunciators (R-Series) Batteries and Power Supplies
- Pull Stations Beam & Duct Detectors
- SCALABLE ASPIRATING DETECTION ModuLaser® Aspirating Smoke Detection System
- VESDA by Xtralis® ModuLaser® Aspirating Smoke Detection
- ModuLaser® Aspirating Detection CONFIGURATION IS KEY
- Genesis LED Series Genesis Outdoor Series
- Universal Room-Side Wiring Plate G4SE Strobe Expander
- Interchangeable Covers
• Next Generation Detection Technology
• Integrates optical smoke with rate-of-rise heat sensing
• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration
• Uses existing wiring
• Automatic device mapping
• Sensor Markings Provide Easy Testing Identification
• Up To 250 Total Signature Addresses Per Loop
• Two levels of environmental compensation
• Two levels of dirty detector warning
• Twenty pre-alarm settings
• Five sensitivity settings
• Non-volatile memory
• Electronic addressing
• Environmental compensation
• Automatic day/night sensitivity adjustment
• Bicolor (green/red) status LED
• Standard, relay, fault isolator, and audible mounting bases
Related Products:
- SPECIFY A SIGNATURE SOLUTION Signature Optica™ Smoke Detectors
- Signature Optica™ Smoke and Heat Detectors Signature Optica™ Smoke, Heat, and Carbon Monoxide Detectors
- Signature Intelligent Multisensor Detectors Signature Optica™ Smoke and Carbon Monoxide Detectors
- Intelligent Input & Output Modules Pull Stations
- Specialized Signature Optica™ Multisensor Detectors
- Signature Optica™ Senior Living Signature Optica™ Overview
- INTELLIGENT SOLUTIONS CONVENTIONAL SOLUTIONS
- ASPIRATING DETECTION Signature Optica™ Overview
- Signature Optica™ Multisensor Detectors Signature Optica™ Steam Test
- SPEAKER-STROBE APPLIANCES HORN-STROBE APPLIANCES
- VOICE COMMUNICATIONS SYSTEMS Genesis™ LED Notification Appliances.
- Mass Notification System Planning Universal Room-Side Wiring Plate
- G4SE Strobe Expander Interchangeable Covers
- The reliable sensor principle for consistent
response performance at the highest level of
security against false alarms
- Loop powered – no need for external power supply
• Individual control of the sounder
• Tones can be used for other purposes in addition to
warning of fire, making the device ideal for use in
schools (school bell) etc.
• Soft start option, ideal for hospitals and nursing homes
• No additional short address
• Automatic synchronization of various IQ8Quad alarm signaling devices
• Maximum sound level: 92 dB (A) at 1 m
• Maximum sound pressure can be set
• Multiple signal components can be combined to one signal template
• Signal template and repetition rates can be set
• Up to 26 different languages are available
• 20 different signal tones, incl. DIN-tone
• Low power consumption
• Comes standard with one loop (expandable to two) that
supports up to 250 (expandable to 500) intelligent devices:
each iO500 loop supports up to 125 detectors and up to 125
modules.
• Supports Signature Series intelligent modules and detectors
• Combines the Signature intelligent releasing module with
Signature multisensor detectors for reliable suppression
• Four Class B NACs or two Class A NACs.
• Form C contacts for alarm and trouble, Form A for supervisory
• Electronic addressing with automatic device mapping
• Optional Ethernet port for diagnostics, programming and a
variety of system reports
• Two programmable switches with LEDs and custom labeling
• Supports Genesis horn silence over two wires and UL
1971-compliant strobe synchronization
• Supports up to eight serial annunciators, (LCD, LED-only, and
graphic interface).
• 1,000 event panel history log
• Can use existing wiring for most retrofit applications
• Upload/download remotely or locally
• Two-level maintenance alert reporting
• Pre-alarm and alarm verification by point
• Adjustable detector sensitivity
• 4 x 20 character backlit LCD display
• Optional earthquake hardening: OSHPD seismic pre-approval
for component Importance Factor 1.5
Related Products:
- MANAGEMENT IS A MUST FW-FAST
- FW-HSSX1: Aspirated Detection Interface FW-DARCOM: Third-party Interoperability
- FW-IPMON1000: Life Safety Integration WebClients: Global VPN Communications
- Workstations Servers
- Monitors EST4 Fire & Life Safety Platform
- iO Life Safety System Fire Safety System Upgrades
- EMPOWERING PROACTIVE SERVICE Meet the ESTMobile™ App
- George McNeill & His ESTMobile™ Experience
The FX 6100/FX61002 range is available as a high specification 1 or 2 loop intelligent addressable control panel, offering sophisticated functionality with simple end user operation.
FX6100 uses soft addressing to minimise installation time and remove the potential for error associated with manual addressing.
Features and Benefits
.Available in 1 and 2 loop versions
.Up to 200 addresses per loop
.Full network capability up to 126 panels
.Soft addressing
.Large versatile touch-screen user interface
.Multi-language selection capability
. Integral battery and power supply
.Flexible cause and effect programming
.Simple to operate end user touch-screen interface
The FX6000PR is a cost effective passive repeater panel
which can be programmed via its informative display to
be either fully passive (display only) or semi passive
(restricted system control).
When loop connected the repeater panel will display the
system information text of the connected control panel
and will provide a fire indication, with panel number,
of any connected network control panel that has fire
activation.
• Integral EN54-4 PSUand battery standby for 24 hours (4 loop)
• Integral EN54-4 PSU for 72 hours with external batteries (6 loop)
• Vigilon’s advanced sensing technology and powerful software
processing in the panel quickly identifies real fires
• PC based commissioning tools
allow complex fire plans to be configured
• Advanced loop card technology allows for
system status monitoring and diagnostics
• Extended event log using flash memory card
• The control panel has a simple user interface
with LCD screen providing accurate information in an emergency
• Multiple panel networks can be programmed
seamlessly as one system, allowing for
flexible design and system management
• Flexible programming options are available at the panel
• All Vigilon devices connect onto the same
two core loop, separate sounder or
repeater panel wiring circuits are not required
• In the event of a fire or fault, Vigilon’s analogue addressable
technology will provide a detailed log of events
• PC based Graphics user interface (GUI) available
Related Products:
- BACnet Gateway Single Mode FibreVisual Alarm Devices
- Advanced Vigilon Loop Card Nano Control Panel
- Vigilon Plus Control Panels Non-Addressable Audible
- Visual Devices Electronic Bells
- Xenex Control Panel Conventional Manual Call Points
- ES Detect Non-Addressable Audible
- Visual Alarm Devices Non-Addressable Audible
- Visual Alarm Devices FAAST
- AUTOMATIC PURGING UNIT
- SAMPLING HOLE IDENTIFICATION
- VESDA
• Compact Design
• Advanced LED technology provides superior
current draw performance
• Lower power consumption per device allows
for more notification appliances per circuit and
reduces the need for external power supplies
• Standard and High candela settings in one unit to
meet virtually any application
– 15, 15/75, 30, 75, 110, 185 cd
• Device settings are located on the back of the
unit to prevent tampering
• Includes shorting clip that allows installers to test
the wiring before the device is installed
• Supports 12 to 22 AWG
• Mount to Mircom BB-400 surface mount back
box, single gang, 4-inch square, double gang,
octagon and 4-inch junction boxes
• All units include universal mounting plate
• Red or white finish
• For indoor applications
• Designed to meet a wide range of applications
• SEMS screws for easy wiring
• Panel controlled status LED (except MIX-M501M)
• Analog communications
• Rotary address switches (except MIX-M500X)
• Low standby current
• Mounts in 4” square junction box
Related Products:
- INX-10A INTELLIGENT BOOSTER POWER SUPPLY
- MR-100/MR-200 SERIES
- UIMA4 – INTERFACE FOR CONFIGURING MGC FIRE PANELS
- DH SERIES
- INX-10A INTELLIGENT BOOSTER POWER SUPPLY
- BC-160
- BPS POWER SUPPLIES
- INX-10A INTELLIGENT BOOSTER POWER SUPPLY
- UDACT-300A DIGITAL ALARM COMMUNICATOR TRANSMITTER/DIALER MODULE
