transformer attenuators circuit TL10-RE:

These attenuators enable the sound level in a room to be adjusted by attenuating the sound performance of the speaker units with a transformer in constant-voltage systems (100, 70, 50 V). Each attenuator has an autotransformer, an 11-position switch (10 positions + Off) and front masks. They are available with different output powers, depending on the load that can be connected to them.

Each model (TL10-RE, TL30-RE and TL60-RE) has a by-pass relay able to exclude the attenuator in case of an alarm and/or emergency signal having priority (activation of the relay with a 24 VDC current on an additional two-pole line). They can be easily flush-mounted on a wall using the AC911 box or secured to a wall using the AC913 adaptor.

transformer attenuators circuit TL10-RE 10W Attenuator

The TL10-RE attenuator is equipped with a by-pass relay capable of excluding attenuation in the presence
of alarm and/or emergency signals having priority. It can be easily flush-mounted using the Paso AC911
box or wall-mounted using the AC913 adapte

shure mvl clip-on microphone:

the headphone jack of a smartphone or tablet and opening recording apps
such as the ShurePlus® MOTIV recording app, the user can easily and discretely capture high-quality audio. It is ideal for use in speech and other applications requiring minimal visibility.

Shure mvl clip-on microphone features:

• Superior audio clarity
• Effective immunity to audible interference
• Low self-noise
• More even, natural response across frequency range
• Less susceptible to distortion
• Matte black, sleek, low-profile design for inconspicuous placement
• Snug-fit foam windscreen provides additional protection from plosives and wind noise
• Includes protective storage pouch, tie clip, and windscreen
• The optional Rycote Mini Windjammer fits over the included windscreen
• Legendary Shure quality and reliability

shure slx wireless systems:

Wireless system offers easy set-up and high audio quality for virtually any application. Features include Automatic Frequency Selection, Automatic Transmitter Set-Up, Predictive Diversity technology, and removable antennas with rack hardware.

Frequency Band Selection

Most countries closely regulate the radio frequencies used in the transmission of wireless Infor mation. These regulations state which devices can use which frequencies, and help to limit the amount of RF (radio frequency) interference in all wireless communications. To be flexible enough to operate worldwide, SLX receivers are available in a number of models, each with a unique frequency range. Each frequency range, or band, spans up to 24 MHz of the

wireless broadcast spectrum.

To facilitate system setup and protect against RF interference, each system comes with multiple predefined frequency groups and channels.

When using a single SLX system, the operating frequency will generally not have to be changed. In an installation with multiple receiver/transmitter systems, each system must operate on a sepa rate channel. The group and channel system provides an optimum frequency spread when using multiple systems.

Within a single frequency band, up to 12 individual transmitter/receiver systems may be used in a single installation. In regions where additional frequency bands are available, it is possible to operate up to 20 systems simultaneously. Check with your local Shure retailer for information on which bands are available in your area

shure slx wireless systems instructions:

Single System Setup
Follow these steps when using a single SLX system : Automatic Frequency Selection Scans for an available channel and sets the receiver to that channel . Automatic Transmitter Setup
1. Turn On the transmitter.
2. Open the transmitter battery compartment to display the infrared ( IR ) port
3. With the IR port exposed to the receiver , press sync .
4. Hold the sync button until the red light stops flashing on both receiver and transmitter .
5. When the receiver ready light glows , the system is ready for use .
6. Close the transmitter battery compartment .

A-1712 ER

Description

Type: Mixer amplifier with 120 watts of power.

Zones: 2 zones.

Inputs: 9 channels (6 microphone inputs + 3 auxiliary audio sources).

Zone Selection: Capability to select and manage different zones.

Recording Output: Option to add an output for connecting to a recording unit.

Additional Audio Source: Ability to add extra audio sources.

A-2030 H 4

Description

Amplifier Power: 30 watts.

Inputs: 5 channels (3 microphone inputs + 2 auxiliary audio sources).

Additional Features: Capability to add an extra audio source.

BS-1015BSW

Description
Type: Headset with a streamlined design and white color.

Operation at 100V: 15 watts, 10 watts, or 5 watts.

Operation at 70V: 7.5 watts, 5 watts, or 2.5 watts.

BS-633A

Description

Speaker Type: 6-watt speakers with a streamlined design, ideal for mounting on concrete ceilings or walls.

Installation: Suitable for both ceilings and walls.

Operation at 100V: 6 watts, 3 watts, or 1 watt.

Operation at 70V: 3 watts, 1.5 watts, or 0.5 watts.

Description
DM-1100 Dynamic Microphone

Type: Dynamic microphone with a frequency range of 100 Hz to 12 kHz.

Impedance: 600 ohms.

Features: Includes an On/Off button and is constructed from aluminum with a unidirectional pickup pattern.

Cable: Comes with a 7.5-meter cord.

DM-524S

Microphone Type: Long-neck microphone with a frequency range of 100 Hz to 10 kHz.

Impedance: 600 ohms.

Pickup Pattern: Cardioid.

Connector: XLR with pin connector.

Switch: On/Off button.