The LBB 1930/20 is a powerful 120 W power amplifier in a
2U high 19” case for rack mounting or tabletop use. LEDs
on the front panel show the status of the amplifier:
power, audio output level, and supervised functions. This
high-performance unit fulfills a wide range of public
address requirements at a surprisingly low cost.

Mixing Amplifier
* 4 XLR microphone line inputs
* 1 Input with priority
* 3 RCA Music Inputs
* 1 RJ45 input
* All settings can be adjusted on the front panel
* Headphone jack
* VU meter
* Speaker output 100 V and 8 ohms
* Dimensions (H x W x D): 100 x 430 x 270 mm

– Suitable for speech and music reproduction
– Light weight ABS material
– Easy to install
– Unobtrusive design
– EN 54‑24 certified

Power Mixer
* Power: 360/ 240 W
* 4 Microphone/ line inputs
* One input with priority
* 1 Music input
* All settings adjustable from outside
* Headphones out
* VU Meter
* Loudspeaker out 100 V and 4 Ohm
* Dimensions: 100 x 430 x 270 mm

In-ceiling speaker with metal
grille
• Metal back cover
• Colour white RAL9016,
• Coaxial loudspeaker with 5”
woofer and 1/2” tweeter
• 88dB+/- 3dB sensitivity @1W/1m
• Nominal Power
2,5/5/10/20W/8ohm with
100V/70V line transformer
• Building-in hole 170mm

Rated power : 6 W
Adjustable power : 6-3 W
The CSL106T speaker unit for ceiling-mounting consists of an ABS structure with a white RAL 9016 painted grille. It features a compact size and an excellent acoustic performance

2-way system
White or black ABS enclosure
5″ LF woofer
0,75″ HF tweeter
100V Line transformer (15/25/40/50W)
Directional wall mount bracket included
Connection via plug in «euroblock» connector
The FBT 550WHT/BT two way speaker unit is equipped with a 100V line transformer and provides the possibility of an 8
Ohm connection. An exclusive fully adjustable support bracket provide a flexible mounting system for virtually any
application. The low frequency section is a 5″ woofer and the high frequency section is a 0,75″ tweeter. The power
selector switch is installed in the rear of the enclosure. The loudspeaker system meets the following performance
criteria: line transformer with power taps for 15/25/40/50W, frequency response from 80Hz to 20kHz (-10dB)

40w 2 WAY BASS REFLEX SPEAKER UNIT
PROJECT 640 6.5 woofer and 1 tweeter passive installation speakers feature a fully adjustable support bracket for easy installation. Connection is via a Euroblock connector. 8 Ohm and 100V – Recommended Amplifier: 80W RMS. Long Term Power:

PROJECT passive installation speakers feature a fully adjustable support bracket for easy installation. Feature a 3.5 woofer and 0.5 tweeter. Connection is via a Euroblock connector

A-2120DD-EB
Digital Mixer Amplifiers

The A-2120DD-EB is a high cost-performance mixer power amplifier suited for broadcasting paging or background music in schools, offices, shops, factories, mosques, churches and large rooms.

3 microphone inputs, 2 AUX input and 1 recording output
DD-varieties with 2 phone jacks and 1 5-pin DIN input
D-varieties with 3 phone jacks
Speaker output of constant voltage distribution system (100 V)
Independent tone control of boost and cut type for both high and low frequency
MIC 1 with phantom power and mute function
Current limiter to prevent damage due to current overload
Excess heat limit to protect the transistor and power transformer

The A-2240 is a high performance mixer power amplifier
suited for broadcasting paging or background music in
schools, offices, shops, factories, mosques, churches
and large rooms.

The BS-1030 is a small, 2-way bass-reflex type
speaker featuring a wide frequency range suitable
for use for announcements and music playback. The
BS-1030B can be used for both high-impedance and
low-impedance applications. The speaker’s splashproof construction permits it to be installed under the
eaves where the speaker is not directly exposed to rain.

The BS-678, of which cabinet is made of wood, can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection. The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily even if an outward force is applied to. The input impedance can be easily changed by changing the tap position of the transformer.

The MD-210CTU, a 1U 19” rack size all-in-one player, is capable of playing various audio sources, such as CD, USB, SD/MMC Card and FM Radio. In CD mode, CD or USB or SD/MMC Card can be selected to play the audio source, while Tuner mode plays FM Radio. The FM radio tuner is able to store up to 30 channels in preset memory